Re: BUG: unable to handle kernel NULL pointer dereference in transport_allocate_data_tasks+0x1af/0x2cc [target_core_mod]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2011-08-08 at 14:22 -0700, Kiran Patil wrote:
> Hi Nick and Chris,
> 
> See my in-line response. This response may not be directly useful, but 
> could lead to the solution.
> 
> On 8/8/2011 1:42 PM, Nicholas A. Bellinger wrote:
> > On Sun, 2011-08-07 at 19:16 +0100, Chris Boot wrote:
> >> Hi all,
> >>
> >> I've been using LIO for a little while, and thought I'd give what's
> >> currently in linux-2.6.git (master) a shot. Unfortunately, I get a BUG
> >> within seconds of an initiator connecting to one of my targets - this
> >> isn't immediate but happens a couple of seconds in. The kernel log is below:
> >>
> > Greetings again Chris,
> >
> > Thank you for your detailed bug reported with the v4.1.0-rc1 code.  My
> > comments are below.
> >
> >> [  109.599886] BUG: unable to handle kernel NULL pointer dereference at
> >> 000000000000000c
> >> [  109.617486] IP: [<ffffffffa048ca5a>]
> >> transport_allocate_data_tasks+0x1af/0x2cc [target_core_mod]
> >> [  109.636400] PGD 0
> >> [  109.647538] Oops: 0000 [#1] SMP
> >> [  109.660125] CPU 1
> >> [  109.662253] Modules linked in: iscsi_target_mod target_core_pscsi
> >> target_core_file target_core_iblock target_core_mod configfs
> >> ip6table_mangle iptable_mangle xt_DSCP xt_owner tun ip6table_filter
> >> ip6_tables iptable_filter ip_tables cpufreq_stats cpufreq_userspace
> >> cpufreq_conservative ebtable_nat ebtables x_tables cpufreq_powersave
> >> ipmi_watchdog microcode nfsd nfs lockd fscache auth_rpcgss nfs_acl
> >> sunrpc bridge stp ext4 jbd2 crc16 ipmi_si ipmi_devintf ipmi_msghandler
> >> acpi_cpufreq mperf coretemp fuse crc32c_intel aesni_intel cryptd
> >> aes_x86_64 aes_generic dm_crypt kvm_intel kvm snd_pcm snd_timer snd
> >> soundcore snd_page_alloc processor evdev i2c_i801 ftdi_sio i2c_core
> >> joydev usbserial video pcspkr button ext3 jbd mbcache dm_mod sg sd_mod
> >> crc_t10dif usbhid hid ahci libahci 3w_9xxx libata ehci_hcd thermal fan
> >> scsi_mod thermal_sys usbcore e1000e [last unloaded: scsi_wait_scan]
> >> [  109.674461]
> >> [  109.674464] Pid: 4703, comm: iscsi_trx Not tainted 3.0.0+ #1 Intel
> >> Corporation S1200BTL/S1200BTL
> >> [  109.674468] RIP: 0010:[<ffffffffa048ca5a>]  [<ffffffffa048ca5a>]
> >> transport_allocate_data_tasks+0x1af/0x2cc [target_core_mod]
> >> [  109.674478] RSP: 0018:ffff880187ccdcd0  EFLAGS: 00010283
> >> [  109.674480] RAX: 0000000000000000 RBX: ffff8801877dd280 RCX:
> >> 0000000000000000
> >> [  109.674483] RDX: 0000000000000000 RSI: 0000000000000020 RDI:
> >> ffff88022dbd23e0
> >> [  109.674485] RBP: ffff880230327c00 R08: 0000000000000000 R09:
> >> 0000000000000040
> >> [  109.674487] R10: ffff88018769cc00 R11: ffff8801877dd040 R12:
> >> 0000000000000000
> >> [  109.674490] R13: 0000000000000002 R14: ffff880189884400 R15:
> >> 0000000000000100
> >> [  109.674493] FS:  0000000000000000(0000) GS:ffff880236820000(0000)
> >> knlGS:0000000000000000
> >> [  109.674496] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> >> [  109.674498] CR2: 000000000000000c CR3: 0000000001604000 CR4:
> >> 00000000000426e0
> >> [  109.674500] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
> >> 0000000000000000
> >> [  109.674503] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
> >> 0000000000000400
> >> [  109.674506] Process iscsi_trx (pid: 4703, threadinfo
> >> ffff880187ccc000, task ffff8801edb571e0)
> >> [  109.674508] Stack:
> >> [  109.674509]  0000000000000000 ffff880200000000 ffff88022dbd23e0
> >> 0000000000000100
> >> [  109.674513]  0000000100000200 000000000062ddf0 0000004000000020
> >> ffff8801877dd40c
> >> [  109.674516]  0000004100000002 ffff8801877dd4a8 0000000000000000
> >> ffff8801877dd280
> >> [  109.674520] Call Trace:
> >> [  109.674529]  [<ffffffffa048f7d8>] ?
> >> transport_generic_new_cmd+0x190/0x2f6 [target_core_mod]
> >> [  109.674537]  [<ffffffffa04c413e>] ? iscsit_allocate_iovecs+0x24/0x4d
> >> [iscsi_target_mod]
> >> [  109.674545]  [<ffffffffa048f9a5>] ?
> >> transport_handle_cdb_direct+0x67/0x8e [target_core_mod]
> >> [  109.674552]  [<ffffffffa04c253b>] ? iscsit_sequence_cmd+0x5f/0xd8
> >> [iscsi_target_mod]
> >> [  109.674558]  [<ffffffffa04c5b01>] ?
> >> iscsi_target_rx_thread+0x7d2/0x1a71 [iscsi_target_mod]
> >> [  109.674564]  [<ffffffff8100d027>] ? load_TLS+0x7/0xa
> >> [  109.674567]  [<ffffffff8100d60f>] ? __switch_to+0xc1/0x20e
> >> [  109.674574]  [<ffffffffa04c532f>] ?
> >> iscsit_thread_get_cpumask+0x88/0x88 [iscsi_target_mod]
> >> [  109.674578]  [<ffffffff8105e48d>] ? kthread+0x76/0x7e
> >> [  109.674582]  [<ffffffff81334a14>] ? kernel_thread_helper+0x4/0x10
> >> [  109.674585]  [<ffffffff8105e417>] ? kthread_worker_fn+0x139/0x139
> >> [  109.674588]  [<ffffffff81334a10>] ? gs_change+0x13/0x13
> >> [  109.674590] Code: 10 03 00 00 ff 90 c0 00 00 00 e9 1c 01 00 00 8b 75
> >> 10 48 89 c7 e8 97 7f d1 e0 8b 55 40 4c 8b 45 08 c7 44 24 30 00 00 00 00
> >> eb 45
> >> [  109.674603]  39 54 24 0c 77 47 4c 89 c7 4c 89 e6 b9 08 00 00 00 f3 a5 4c
> >> [  109.674610] RIP  [<ffffffffa048ca5a>]
> >> transport_allocate_data_tasks+0x1af/0x2cc [target_core_mod]
> >> [  109.674618]  RSP<ffff880187ccdcd0>
> >> [  109.674620] CR2: 000000000000000c
> >> [  109.674662] ---[ end trace 263ff2d45aa35d71 ]---
> >> [  203.639102] iSCSI Login timeout on Network Portal
> >> 2001:8b0:49:1:21e:67ff:fe14:69f4:3260
> >>
> >> The crash happens here:
> >>
> >> (gdb) list *transport_allocate_data_tasks+0x1af
> >> 0x11a5a is in transport_allocate_data_tasks
> >> (drivers/target/target_core_transport.c:4142).
> >> 4137
> >> 4138                    task_size = task->task_size;
> >> 4139
> >> 4140                    /* Build new sgl, only up to task_size */
> >> 4141                    for_each_sg(task->task_sg, sg,
> >> task->task_sg_nents, count) {
> >> 4142                            if (cmd_sg->length>  task_size)
> 
> Looks like 'cmd_sg' is NULL, How did it get initailized in first place.

The *cmd_sg pointer is getting setup at the top of task allocation for
loop in transport_allocate_data_tasks(), otherwise this code would not
be working at all..  ;)

--nab

--
To unsubscribe from this list: send the line "unsubscribe target-devel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SCSI]     [Kernel Newbies]     [Linux SCSI Target Infrastructure]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Device Mapper]

  Powered by Linux