Hi,
I want to duplicate partition 1 and partition 2 using systemd-repart.
This is for SBC, I use mkosi to create the OS image.
By default, it needs 2 partitions
1. Boot partition: FAT32 used by 1st stage bootloader
2. Root partition: EXT4
This works fine.
Then I want to create "recovery mode", it needs 4 partition
1. Default Boot partition
2. Default Root partition
3. Secondary Boot partition
4. Secondary Root partition
Partition [3] should be copied from partition [1] and partition [4] should be copied from partition [2].
I've configured the systemd-repart to run in initrd, I've also configured udev rules to create symlink to device node:
1. /dev/gpt-part-boot -> /dev/nvme0n1p1
2. /dev/gpt-part-root -> /dev/nvme0n1p2 (mounted on /sysroot, systemd-repart need this path because it's hardcoded in the source code)
But when I specify CopyBlocks=/dev/gpt-part-boot in the repart.d conf file, it failed with this error message:
"Failed to open '/dev/gpt-part-boot': No such file or directory"
The systemd-repart failed in initrd, but then it will run again after switch-root, and it works fine.
Any hints? I want the systemd-repart to run fine in initrd, not after switch-root.
Thank you.
