Q: journalctl -g

["Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>]

Hi!

In SLES15 SP3 (systemd-246.16-7.33.1.x86_64) I have this effect, wondering whether it is a bug or a feature:
When using "journalctl -b -g raid" I see that _ome_ matches are highlighted in red, but others aren't. For example:
Mar 01 01:37:09 h16 kernel: mega*raid*_sas 0000:c1:00.0: BAR:0x1  BAR's base_addr(phys):0x00000000a5500000  mapped virt_addr:0x00000000ae628322
Mar 01 01:37:09 h16 kernel: megaraid_sas 0000:c1:00.0: FW now in Ready state
...

That means in the line following the raid is not highlighted, even though it matched obviously.
Likewise any further "megaraid_sas" aren't highlighted.

But also those are not highlighted:
Mar 01 01:37:20 h16 kernel: raid6: avx2x4   gen() 16182 MB/s

Mar 01 01:37:47 h16 kernel: md/raid1:md127: active with 2 out of 2 mirrors

Mar 01 01:37:48 h16 smartd[5871]: Device: /dev/bus/0 [megaraid_disk_00], type changed from 'megaraid,0' to 'sat+megaraid,0'

But here it is highlighted again:
Mar 01 01:38:55 h16 pacemaker-controld[7236]:  notice: Requesting local execution of probe operation for prm_lockspace_*raid*_md10 on h16
Mar 01 01:38:55 h16 pacemaker-controld[7236]:  notice: Result of probe operation for prm_lockspace_*raid*_md10 on h16: not running

And this, too:
Mar 01 07:58:44 h16 kernel: mega*raid*_sas 0000:c1:00.0: Firmware crash dump is not available
Mar 01 08:00:47 h16 supportconfig[671]: Software *Raid*...

And this not:
Mar 02 03:07:48 h16 smartd[5871]: Device: /dev/bus/0 [megaraid_disk_00] [SAT], starting scheduled Short Self-Test.

Regards,
Ulrich