Antw: [EXT] Failing UnitTest for Journald

["Ulrich Windl" <Ulrich.Windl@xxxxxxxxxxxxxxxxxxxx>]

Hi!

My guess is you'll get a faster useful response if you publish your test
cases.

Regards,
Ulrich

>>> Andreas Krueger <Andreas.Krueger@xxxxxxxxxx> schrieb am 05.07.2021 um
20:46 in
Nachricht
<AM0PR08MB37948F6816C06F56D904E361CF1C9@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>

> Hi Folks,
> 
> for a customer I have to verify the behavior of the logger in its system 
> (Linux debianVM 4.19.0‑6‑amd64 #1 SMP Debian 4.19.67‑2+deb10u1 (2019‑09‑20)
x86_64 
> GNU/Linux), which is journald (systemd 241 (241)).
> For this, I have written some unit tests that work all well, when executed 
> separately. But running together they lead to some erroneous behavior that I

> cannot explain ‑  maybe you have an idea what's going wrong...
> 
> Essentially there are 4 tests with increasing complexity:
> 
>   1.  The first one just sends 5 small messages (~20 bytes) with priority 
> Debug, Info, Warning, Error and Critical (the customer only needs these 
> priorities). After that, the logger's storage is synchronized and analyzed
if 
> all messages have been arrived correctly (via APIs sd_journal_...).
>   2.  The second test sends 10,000 small messages (~20 bytes) to the logger

> with priority Debug. After that, the logger's storage is synchronized and 
> analyzed if all messages have been arrived correctly (via APIs 
> sd_journal_...).
>   3.  The third one sends 10,000 big messages (~10,000 bytes) to the logger

> with priority Debug, which are good to compress. After that, the logger's 
> storage is synchronized and analyzed if all messages have been arrived 
> correctly (via APIs sd_journal_...).
>   4.  The last one sends 10,000 big messages (~10,000 bytes) to the logger 
> with priority Debug, which are hard to compress. After that, the logger's 
> storage is synchronized and analyzed if all messages have been arrived 
> correctly (via APIs sd_journal_...).
> 
> The following observations can be made now:
> 
>   *   If all tests are started separately, all is fine.
>   *   If test 3 + 4 are started together, all is fine.
>   *   If test 2 + 3 + 4 are started together, all is fine.
>   *   If test 1 + 2 + 3 + 4 are started together, test 4 has lost one 
> message, which is always the last one.
> 
> In my test collection there is another quite simple test, which is a bit 
> more complex than test 1 ‑ let's call it 1a. When test 1 + 1a + 2 + 3 + 4
are 
> started together, test 4 loses about 10 messages, which are always the last

> messages sent to the logger. This can be verified just by using the command

> journalctl ‑no‑pager ‑n 20.
> 
> Suspecting that this may be a timing issue, I have delayed the execution of

> test 4 by 10 seconds, but without success. Does anyone have an idea for this

> behavior?
> 
> Attached next you will find the corresponding configuration.
> 
> With regards,
> Andreas
> 
> 
> 
> 
> [Journal]
> Storage=persistent
> Compress=yes
> Seal=yes
> SplitMode=none
> #SyncIntervalSec=5m
> #RateLimitIntervalSec=30s
> #RateLimitBurst=10000
> SystemMaxUse=500M
> #SystemKeepFree=
> SystemMaxFileSize=50M
> SystemMaxFiles=13
> #RuntimeMaxUse=
> #RuntimeKeepFree=
> #RuntimeMaxFileSize=
> #RuntimeMaxFiles=100
> MaxRetentionSec=12month
> #MaxFileSec=1month
> #ForwardToSyslog=yes
> #ForwardToKMsg=no
> #ForwardToConsole=no
> #ForwardToWall=yes
> #TTYPath=/dev/console
> #MaxLevelStore=debug
> #MaxLevelSyslog=debug
> #MaxLevelKMsg=notice
> #MaxLevelConsole=info
> #MaxLevelWall=emerg
> #LineMax=48K
> #ReadKMsg=yes



_______________________________________________
systemd-devel mailing list
systemd-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/systemd-devel