3.2.70-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
commit 5b889e379f340f43b1252abde5d37a7084c846b9 upstream.
As reported by Josh Boyer <jwboyer@xxxxxxxxxx>:
> drivers/edac/sb_edac.c: In function 'get_memory_error_data':
> drivers/edac/sb_edac.c:861:2: warning: left shift count >= width of type
> [enabled by default]
> <snip>
> ERROR: "__udivdi3" [drivers/edac/sb_edac.ko] undefined!
> make[1]: *** [__modpost] Error 1
> make: *** [modules] Error 2
PS.: compile-tested only
Reported-by: Josh Boyer <jwboyer@xxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
[bwh: Prerequisite for "sb_edac: Fix erroneous bytes->gigabytes conversion"]
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
drivers/edac/Kconfig | 2 +-
drivers/edac/sb_edac.c | 48 +++++++++++++++++++++++++++++-------------------
2 files changed, 30 insertions(+), 20 deletions(-)
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -214,7 +214,7 @@ config EDAC_I7300
config EDAC_SBRIDGE
tristate "Intel Sandy-Bridge Integrated MC"
- depends on EDAC_MM_EDAC && PCI && X86_64 && X86_MCE_INTEL
+ depends on EDAC_MM_EDAC && PCI && X86 && X86_MCE_INTEL
depends on EXPERIMENTAL
help
Support for error detection and correction the Intel
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -20,6 +20,7 @@
#include <linux/mmzone.h>
#include <linux/smp.h>
#include <linux/bitmap.h>
+#include <linux/math64.h>
#include <asm/processor.h>
#include <asm/mce.h>
@@ -671,6 +672,7 @@ static void get_memory_layout(const stru
u32 reg;
u64 limit, prv = 0;
u64 tmp_mb;
+ u32 mb, kb;
u32 rir_way;
/*
@@ -683,8 +685,9 @@ static void get_memory_layout(const stru
pvt->tolm = GET_TOLM(reg);
tmp_mb = (1 + pvt->tolm) >> 20;
- debugf0("TOLM: %Lu.%03Lu GB (0x%016Lx)\n",
- tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tolm);
+ mb = div_u64_rem(tmp_mb, 1000, &kb);
+ debugf0("TOLM: %u.%03u GB (0x%016Lx)\n",
+ mb, kb, (u64)pvt->tolm);
/* Address range is already 45:25 */
pci_read_config_dword(pvt->pci_sad1, TOHM,
@@ -692,8 +695,9 @@ static void get_memory_layout(const stru
pvt->tohm = GET_TOHM(reg);
tmp_mb = (1 + pvt->tohm) >> 20;
- debugf0("TOHM: %Lu.%03Lu GB (0x%016Lx)",
- tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tohm);
+ mb = div_u64_rem(tmp_mb, 1000, &kb);
+ debugf0("TOHM: %u.%03u GB (0x%016Lx)",
+ mb, kb, (u64)pvt->tohm);
/*
* Step 2) Get SAD range and SAD Interleave list
@@ -715,10 +719,11 @@ static void get_memory_layout(const stru
break;
tmp_mb = (limit + 1) >> 20;
- debugf0("SAD#%d %s up to %Lu.%03Lu GB (0x%016Lx) %s reg=0x%08x\n",
+ mb = div_u64_rem(tmp_mb, 1000, &kb);
+ debugf0("SAD#%d %s up to %u.%03u GB (0x%016Lx) %s reg=0x%08x\n",
n_sads,
get_dram_attr(reg),
- tmp_mb / 1000, tmp_mb % 1000,
+ mb, kb,
((u64)tmp_mb) << 20L,
INTERLEAVE_MODE(reg) ? "Interleave: 8:6" : "Interleave: [8:6]XOR[18:16]",
reg);
@@ -748,8 +753,9 @@ static void get_memory_layout(const stru
break;
tmp_mb = (limit + 1) >> 20;
- debugf0("TAD#%d: up to %Lu.%03Lu GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n",
- n_tads, tmp_mb / 1000, tmp_mb % 1000,
+ mb = div_u64_rem(tmp_mb, 1000, &kb);
+ debugf0("TAD#%d: up to %u.%03u GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n",
+ n_tads, mb, kb,
((u64)tmp_mb) << 20L,
(u32)TAD_SOCK(reg),
(u32)TAD_CH(reg),
@@ -772,9 +778,10 @@ static void get_memory_layout(const stru
tad_ch_nilv_offset[j],
®);
tmp_mb = TAD_OFFSET(reg) >> 20;
- debugf0("TAD CH#%d, offset #%d: %Lu.%03Lu GB (0x%016Lx), reg=0x%08x\n",
+ mb = div_u64_rem(tmp_mb, 1000, &kb);
+ debugf0("TAD CH#%d, offset #%d: %u.%03u GB (0x%016Lx), reg=0x%08x\n",
i, j,
- tmp_mb / 1000, tmp_mb % 1000,
+ mb, kb,
((u64)tmp_mb) << 20L,
reg);
}
@@ -796,9 +803,10 @@ static void get_memory_layout(const stru
tmp_mb = RIR_LIMIT(reg) >> 20;
rir_way = 1 << RIR_WAY(reg);
- debugf0("CH#%d RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d, reg=0x%08x\n",
+ mb = div_u64_rem(tmp_mb, 1000, &kb);
+ debugf0("CH#%d RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d, reg=0x%08x\n",
i, j,
- tmp_mb / 1000, tmp_mb % 1000,
+ mb, kb,
((u64)tmp_mb) << 20L,
rir_way,
reg);
@@ -809,9 +817,10 @@ static void get_memory_layout(const stru
®);
tmp_mb = RIR_OFFSET(reg) << 6;
- debugf0("CH#%d RIR#%d INTL#%d, offset %Lu.%03Lu GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
+ mb = div_u64_rem(tmp_mb, 1000, &kb);
+ debugf0("CH#%d RIR#%d INTL#%d, offset %u.%03u GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
i, j, k,
- tmp_mb / 1000, tmp_mb % 1000,
+ mb, kb,
((u64)tmp_mb) << 20L,
(u32)RIR_RNK_TGT(reg),
reg);
@@ -849,6 +858,7 @@ static int get_memory_error_data(struct
u8 ch_way,sck_way;
u32 tad_offset;
u32 rir_way;
+ u32 mb, kb;
u64 ch_addr, offset, limit, prv = 0;
@@ -859,7 +869,7 @@ static int get_memory_error_data(struct
* range (e. g. VGA addresses). It is unlikely, however, that the
* memory controller would generate an error on that range.
*/
- if ((addr > (u64) pvt->tolm) && (addr < (1L << 32))) {
+ if ((addr > (u64) pvt->tolm) && (addr < (1LL << 32))) {
sprintf(msg, "Error at TOLM area, on addr 0x%08Lx", addr);
edac_mc_handle_ce_no_info(mci, msg);
return -EINVAL;
@@ -1054,7 +1064,7 @@ static int get_memory_error_data(struct
ch_addr = addr & 0x7f;
/* Remove socket wayness and remove 6 bits */
addr >>= 6;
- addr /= sck_xch;
+ addr = div_u64(addr, sck_xch);
#if 0
/* Divide by channel way */
addr = addr / ch_way;
@@ -1074,10 +1084,10 @@ static int get_memory_error_data(struct
continue;
limit = RIR_LIMIT(reg);
-
- debugf0("RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d\n",
+ mb = div_u64_rem(limit >> 20, 1000, &kb);
+ debugf0("RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d\n",
n_rir,
- (limit >> 20) / 1000, (limit >> 20) % 1000,
+ mb, kb,
limit,
1 << RIR_WAY(reg));
if (ch_addr <= limit)
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html