On Mon, Jul 27, 2015 at 12:47:13PM +0100, Sifan Naeem wrote: > Following patches are required to fix the existing driver to > support i2c on pistachio. > > Tested on Pistachio bub using an Adafruit I2C Non-Volatile FRAM Breakout > (256Kbit / 32KByte) eeprom. > > Used i2c buildroot tools to test the eeprom and the other i2c blocks. > Also used dd commands to copy data to and then to dump data from the > eeprom. i2ctransfer was used to test repeated starts and verified > using a scope. That sounds like good testing \o/ If you are happy with i2ctransfer, then please consider adding Tested-by tags to the i2ctransfer patches, so Jean gets a more cosy feeling to include them to i2ctools. > > Cc: Stable kernel (v3.19+) <stable@xxxxxxxxxxxxxxx> I am happy for indications like "please consider adding this line for stable: ...", but not CC stable yourself. These patches need changes, so they are noise for the stable lists. The ones I ultimately apply are the proper ones. That being said, I'll mark all your patches "changes reqeuested" since you need to resend based on current review from James (thanks a lot!). Even if some patches are good and got acked, but it is easier for me to mark them all the same :) > > Sifan Naeem (8): > i2c: img-scb: enable fencing for all versions of the ip > i2c: img-scb: do dummy writes before fifo access > i2c: img-scb: use DIV_ROUND_UP to round divisor values > i2c: img-scb: fix LOW and HIGH period values for the SCL clock > i2c: img-scb: reset interrupts in img_i2c_soft_reset > i2c: img-scb: remove start bit detected status after handling > i2c: img-scb: improve transaction complete handle > i2c: img-scb: verify support for requested bit rate > > drivers/i2c/busses/i2c-img-scb.c | 101 ++++++++++++++++++++++---------------- > 1 file changed, 58 insertions(+), 43 deletions(-) > > -- > 1.7.9.5 >
Attachment:
signature.asc
Description: Digital signature