Using % can be slow depending on the architecture.
Using DIV_ROUND_UP is nicer and more efficient way to do it.
Fixes: 27bce4 ("i2c: img-scb: Add Imagination Technologies I2C SCB driver")
Signed-off-by: Sifan Naeem <sifan.naeem@xxxxxxxxxx>
Cc: Stable kernel (v3.19+) <stable@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-img-scb.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index 0368d91..b4f59e1 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -1179,9 +1179,7 @@ static int img_i2c_init(struct img_i2c *i2c)
int_bitrate++;
/* Setup TCKH value */
- tckh = timing.tckh / clk_period;
- if (timing.tckh % clk_period)
- tckh++;
+ tckh = DIV_ROUND_UP(timing.tckh, clk_period);
if (tckh > 0)
data = tckh - 1;
@@ -1201,9 +1199,7 @@ static int img_i2c_init(struct img_i2c *i2c)
img_i2c_writel(i2c, SCB_TIME_TCKL_REG, data);
/* Setup TSDH value */
- tsdh = timing.tsdh / clk_period;
- if (timing.tsdh % clk_period)
- tsdh++;
+ tsdh = DIV_ROUND_UP(timing.tsdh, clk_period);
if (tsdh > 1)
data = tsdh - 1;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html