3.16.7-ckt15 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Felipe Balbi <balbi@xxxxxx>
commit e18b7975c885bc3a938b9a76daf32957ea0235fa upstream.
In case of non-Isochronous transfers, we don't
want to clear DWC3_EP_BUSY flag until XferComplete
event. That's because XferInProgress was only enabled
so we can recycle TRBs and usb_requests quicker, but
there are still other pending requests being transferred.
In order to make sure we don't allow for another StartTransfer
command while the HW is still processing other transfers,
we must keep DWC3_EP_BUSY flag set and this what this patch
does.
Fixes: f3af36511e60 (usb: dwc3: gadget: always enable IOC on
bulk/interrupt transfers)
Reported-by: sundeep subbaraya <sundeep.lkml@xxxxxxxxx>
Tested-by: sundeep subbaraya <sundeep.lkml@xxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
Signed-off-by: Luis Henriques <luis.henriques@xxxxxxxxxxxxx>
---
drivers/usb/dwc3/gadget.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0c4a7aba42cb..18d2ffcc462b 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1987,12 +1987,16 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
{
unsigned status = 0;
int clean_busy;
+ u32 is_xfer_complete;
+
+ is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE);
if (event->status & DEPEVT_STATUS_BUSERR)
status = -ECONNRESET;
clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
- if (clean_busy)
+ if (clean_busy && (is_xfer_complete ||
+ usb_endpoint_xfer_isoc(dep->endpoint.desc)))
dep->flags &= ~DWC3_EP_BUSY;
/*
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html