3.19.8-ckt3 -stable review patch. If anyone has any objections, please let me know. ------------------ From: Matthijs van Duin <matthijsvanduin@xxxxxxxxx> commit 7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302 upstream. Avoid entering "RTC-only mode" at poweroff. It is unsupported by most versions of BeagleBone, and risks hardware damage. The damaging configuration is having system-power-controller without ti,pmic-shutdown-controller. Reported-by: Matthijs van Duin <matthijsvanduin@xxxxxxxxx> Tested-by: Matthijs van Duin <matthijsvanduin@xxxxxxxxx> Signed-off-by: Robert Nelson <robertcnelson@xxxxxxxxx> Cc: Tony Lindgren <tony@xxxxxxxxxxx> Cc: Felipe Balbi <balbi@xxxxxx> Cc: Johan Hovold <johan@xxxxxxxxxx> [Matthijs van Duin: added explanatory comments] Signed-off-by: Matthijs van Duin <matthijsvanduin@xxxxxxxxx> Fixes: http://bugs.elinux.org/issues/143 [tony@xxxxxxxxxxx: updated comments with the hardware breaking info] Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> Signed-off-by: Kamal Mostafa <kamal@xxxxxxxxxxxxx> --- arch/arm/boot/dts/am335x-bone-common.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 2c6248d..7ecde1a 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -223,6 +223,25 @@ /include/ "tps65217.dtsi" &tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ + ti,pmic-shutdown-controller; + regulators { dcdc1_reg: regulator@0 { regulator-name = "vdds_dpr"; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html