2015-06-15 23:00 GMT+09:00 Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>:
> When pl330 driver was used during sound playback, after some time or
> after a number of plays the sound became choppy or totally noisy. For
> example on Odroid XU3 board the first four executions of aplay with
> small WAVE worked fine, but fifth was unrecognizable with errors:
> $ aplay /usr/share/sounds/alsa/Front_Right.wava
> underrun!!! (at least 0.095 ms long)
>
> Issue was caused by wrong residue reported by pl330 driver to
> pcm_dmaengine for its cyclic dma transfers.
>
> The pl330_tx_status(), residue reporting function, used a "last" flag in
> a descriptor to indicate that there is no more data to send.
>
> The pl330_tx_submit() iterated over descriptors trying to remove this
> flag from them and then mark last descriptor as "last". However when
> iterating it actually removed the flag not from descriptors but always
> from last of it (and then reset it). Thus effectively once some
> descriptor was marked as last, then it stayed like this forever causing
> residue to be reported too low.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
> Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function")
> Cc: <stable@xxxxxxxxxxxxxxx>
> Reported-by: gabriel@xxxxxxxxx
> Suggested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Gabriel, could you give this patch a try? It helped for my Odroid XU3,
which has the same audio codec. Nevertheless it would be great to hear
that it solves the initial bug report.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe stable" in