From: Jérôme Glisse <jglisse@xxxxxxxxxx> In order for hibernation to reliably work we need to cleanup more thoroughly the compute ring. Hibernation is different from suspend resume as when we resume from hibernation the hardware is first fully initialize by regular kernel then freeze callback happens (which correspond to a suspend inside the radeon kernel driver) and turn off each of the block. It turns out we were not cleanly shutting down the compute ring. This patch fix that. Hibernation and suspend to ram were tested (several times) on : Bonaire Hawaii Mullins Kaveri Kabini Changed since v1: - Factor the ring stop logic into a function taking ring as arg. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Jérôme Glisse <jglisse@xxxxxxxxxx> Reviewed-by: Christian König <christian.koenig@xxxxxxx> --- drivers/gpu/drm/radeon/cik.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index ba50f3c..8de5081 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -4579,6 +4579,31 @@ void cik_compute_set_wptr(struct radeon_device *rdev, WDOORBELL32(ring->doorbell_index, ring->wptr); } +static void cik_compute_stop(struct radeon_device *rdev, + struct radeon_ring *ring) +{ + u32 j, tmp; + + cik_srbm_select(rdev, ring->me, ring->pipe, ring->queue, 0); + /* Disable wptr polling. */ + tmp = RREG32(CP_PQ_WPTR_POLL_CNTL); + tmp &= ~WPTR_POLL_EN; + WREG32(CP_PQ_WPTR_POLL_CNTL, tmp); + /* Disable HQD. */ + if (RREG32(CP_HQD_ACTIVE) & 1) { + WREG32(CP_HQD_DEQUEUE_REQUEST, 1); + for (j = 0; j < rdev->usec_timeout; j++) { + if (!(RREG32(CP_HQD_ACTIVE) & 1)) + break; + udelay(1); + } + WREG32(CP_HQD_DEQUEUE_REQUEST, 0); + WREG32(CP_HQD_PQ_RPTR, 0); + WREG32(CP_HQD_PQ_WPTR, 0); + } + cik_srbm_select(rdev, 0, 0, 0, 0); +} + /** * cik_cp_compute_enable - enable/disable the compute CP MEs * @@ -4592,6 +4617,15 @@ static void cik_cp_compute_enable(struct radeon_device *rdev, bool enable) if (enable) WREG32(CP_MEC_CNTL, 0); else { + /* + * To make hibernation reliable we need to clear compute ring + * configuration before halting the compute ring. + */ + mutex_lock(&rdev->srbm_mutex); + cik_compute_stop(rdev,&rdev->ring[CAYMAN_RING_TYPE_CP1_INDEX]); + cik_compute_stop(rdev,&rdev->ring[CAYMAN_RING_TYPE_CP2_INDEX]); + mutex_unlock(&rdev->srbm_mutex); + WREG32(CP_MEC_CNTL, (MEC_ME1_HALT | MEC_ME2_HALT)); rdev->ring[CAYMAN_RING_TYPE_CP1_INDEX].ready = false; rdev->ring[CAYMAN_RING_TYPE_CP2_INDEX].ready = false; -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe stable" in