3.16.7-ckt11 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Ulrik De Bie <ulrik.debie-os@xxxxxxxxx>
commit 0dc1587905a50f8f61bbc29e850aa592821e4bea upstream.
The Fujitsu H730 does not work with crc_enabled = 0, even though the
crc_enabled bit in the firmware version indicated it would. When switching
this value to crc_enabled to 1, the touchpad works. This patch uses DMI to
detect H730.
Reported-by: Stefan Valouch <stefan@xxxxxxxxxxx>
Tested-by: Stefan Valouch <stefan@xxxxxxxxxxx>
Tested-by: Alfredo Gemma <alfredo.gemma@xxxxxxxxx>
Signed-off-by: Ulrik De Bie <ulrik.debie-os@xxxxxxxxx>
Acked-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Signed-off-by: Luis Henriques <luis.henriques@xxxxxxxxxxxxx>
---
drivers/input/mouse/elantech.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 29365c60e514..687c149aa12d 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1374,6 +1374,22 @@ static int elantech_reconnect(struct psmouse *psmouse)
}
/*
+ * Some hw_version 4 models do not work with crc_disabled
+ */
+static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+ {
+ /* Fujitsu H730 does not work with crc_enabled == 0 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
+ },
+ },
+#endif
+ { }
+};
+
+/*
* Some hw_version 3 models go into error state when we try to set
* bit 3 and/or bit 1 of r10.
*/
@@ -1450,7 +1466,8 @@ static int elantech_set_properties(struct elantech_data *etd)
* The signatures of v3 and v4 packets change depending on the
* value of this hardware flag.
*/
- etd->crc_enabled = ((etd->fw_version & 0x4000) == 0x4000);
+ etd->crc_enabled = (etd->fw_version & 0x4000) == 0x4000 ||
+ dmi_check_system(elantech_dmi_force_crc_enabled);
/* Enable real hardware resolution on hw_version 3 ? */
etd->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html