From: Ganesan Ramalingam <ganesanr@xxxxxxxxxxxx> Update to the SATA PHY initialization. This is needed for SATA detection to succeed in all configurations. Signed-off-by: Ganesan Ramalingam <ganesanr@xxxxxxxxxxxx> Signed-off-by: Jayachandran C <jchandra@xxxxxxxxxxxx> Cc: linux-mips@xxxxxxxxxxxxxx Patchwork: https://patchwork.linux-mips.org/patch/8886/ Signed-off-by: Ralf Baechle <ralf@xxxxxxxxxxxxxx> --- arch/mips/netlogic/xlp/ahci-init-xlp2.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/mips/netlogic/xlp/ahci-init-xlp2.c b/arch/mips/netlogic/xlp/ahci-init-xlp2.c index c83dbf3..7b066a4 100644 --- a/arch/mips/netlogic/xlp/ahci-init-xlp2.c +++ b/arch/mips/netlogic/xlp/ahci-init-xlp2.c @@ -203,6 +203,7 @@ static u8 read_phy_reg(u64 regbase, u32 addr, u32 physel) static void config_sata_phy(u64 regbase) { u32 port, i, reg; + u8 val; for (port = 0; port < 2; port++) { for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++) @@ -210,6 +211,18 @@ static void config_sata_phy(u64 regbase) for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++) write_phy_reg(regbase, reg, port, sata_phy_config2[i]); + + /* Fix for PHY link up failures at lower temperatures */ + write_phy_reg(regbase, 0x800F, port, 0x1f); + + val = read_phy_reg(regbase, 0x0029, port); + write_phy_reg(regbase, 0x0029, port, val | (0x7 << 1)); + + val = read_phy_reg(regbase, 0x0056, port); + write_phy_reg(regbase, 0x0056, port, val & ~(1 << 3)); + + val = read_phy_reg(regbase, 0x0018, port); + write_phy_reg(regbase, 0x0018, port, val & ~(0x7 << 0)); } } -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html