4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Rafael J. Wysocki" <rafael.j.wysocki@xxxxxxxxx>
commit 0ee0d34985ceffe4036319e1e46df8bff591b9e3 upstream.
It is reported that ACPI interrupts do not work any more on
Dell Latitude D600 after commit c50f13c672df (ACPICA: Save
current masks of enabled GPEs after enable register writes).
The problem turns out to be related to the fact that the
enable_mask and enable_for_run GPE bit masks are not in
sync (in the absence of any system suspend/resume events)
for at least one GPE register on that machine.
Address this problem by writing the enable_for_run mask into
enable_mask as soon as enable_for_run is updated instead of
doing that only after the subsequent register write has
succeeded. For consistency, update acpi_hw_gpe_enable_write()
to store the bit mask to be written into the GPE register
in enable_mask unconditionally before the write.
Since the ACPI_GPE_SAVE_MASK flag is not necessary any more after
that, drop it along with the symbols depending on it.
Reported-and-tested-by: Jim Bos <jim876@xxxxxxxxx>
Fixes: c50f13c672df (ACPICA: Save current masks of enabled GPEs after enable register writes)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/acpi/acpica/evgpe.c | 5 +++--
drivers/acpi/acpica/hwgpe.c | 11 ++++-------
include/acpi/actypes.h | 4 ----
3 files changed, 7 insertions(+), 13 deletions(-)
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -92,6 +92,7 @@ acpi_ev_update_gpe_enable_mask(struct ac
ACPI_SET_BIT(gpe_register_info->enable_for_run,
(u8)register_bit);
}
+ gpe_register_info->enable_mask = gpe_register_info->enable_for_run;
return_ACPI_STATUS(AE_OK);
}
@@ -123,7 +124,7 @@ acpi_status acpi_ev_enable_gpe(struct ac
/* Enable the requested GPE */
- status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE_SAVE);
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
return_ACPI_STATUS(status);
}
@@ -202,7 +203,7 @@ acpi_ev_remove_gpe_reference(struct acpi
if (ACPI_SUCCESS(status)) {
status =
acpi_hw_low_set_gpe(gpe_event_info,
- ACPI_GPE_DISABLE_SAVE);
+ ACPI_GPE_DISABLE);
}
if (ACPI_FAILURE(status)) {
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -89,6 +89,8 @@ u32 acpi_hw_get_gpe_register_bit(struct
* RETURN: Status
*
* DESCRIPTION: Enable or disable a single GPE in the parent enable register.
+ * The enable_mask field of the involved GPE register must be
+ * updated by the caller if necessary.
*
******************************************************************************/
@@ -119,7 +121,7 @@ acpi_hw_low_set_gpe(struct acpi_gpe_even
/* Set or clear just the bit that corresponds to this GPE */
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
- switch (action & ~ACPI_GPE_SAVE_MASK) {
+ switch (action) {
case ACPI_GPE_CONDITIONAL_ENABLE:
/* Only enable if the corresponding enable_mask bit is set */
@@ -149,9 +151,6 @@ acpi_hw_low_set_gpe(struct acpi_gpe_even
/* Write the updated enable mask */
status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address);
- if (ACPI_SUCCESS(status) && (action & ACPI_GPE_SAVE_MASK)) {
- gpe_register_info->enable_mask = (u8)enable_mask;
- }
return (status);
}
@@ -286,10 +285,8 @@ acpi_hw_gpe_enable_write(u8 enable_mask,
{
acpi_status status;
+ gpe_register_info->enable_mask = enable_mask;
status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address);
- if (ACPI_SUCCESS(status)) {
- gpe_register_info->enable_mask = enable_mask;
- }
return (status);
}
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -756,10 +756,6 @@ typedef u32 acpi_event_status;
#define ACPI_GPE_ENABLE 0
#define ACPI_GPE_DISABLE 1
#define ACPI_GPE_CONDITIONAL_ENABLE 2
-#define ACPI_GPE_SAVE_MASK 4
-
-#define ACPI_GPE_ENABLE_SAVE (ACPI_GPE_ENABLE | ACPI_GPE_SAVE_MASK)
-#define ACPI_GPE_DISABLE_SAVE (ACPI_GPE_DISABLE | ACPI_GPE_SAVE_MASK)
/*
* GPE info flags - Per GPE
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html