This is a note to let you know that I've just added the patch titled
drivers: platform: parse IRQ flags from resources
to the 3.19-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drivers-platform-parse-irq-flags-from-resources.patch
and it can be found in the queue-3.19 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 7085a7401ba54e92bbb5aa24d6f428071e18e509 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@xxxxxxxxxx>
Date: Wed, 18 Feb 2015 17:12:18 +0100
Subject: drivers: platform: parse IRQ flags from resources
From: Linus Walleij <linus.walleij@xxxxxxxxxx>
commit 7085a7401ba54e92bbb5aa24d6f428071e18e509 upstream.
This fixes a regression from the net subsystem:
After commit d52fdbb735c36a209f36a628d40ca9185b349ba7
"smc91x: retrieve IRQ and trigger flags in a modern way"
a regression would appear on some legacy platforms such
as the ARM PXA Zylonite that specify IRQ resources like
this:
static struct resource r = {
.start = X,
.end = X,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
};
The previous code would retrieve the resource and parse
the high edge setting in the SMC91x driver, a use pattern
that means every driver specifying an IRQ flag from a
static resource need to parse resource flags and apply
them at runtime.
As we switched the code to use IRQ descriptors to retrieve
the the trigger type like this:
irqd_get_trigger_type(irq_get_irq_data(...));
the code would work for new platforms using e.g. device
tree as the backing irq descriptor would have its flags
properly set, whereas this kind of oldstyle static
resources at no point assign the trigger flags to the
corresponding IRQ descriptor.
To make the behaviour identical on modern device tree
and legacy static platform data platforms, modify
platform_get_irq() to assign the trigger flags to the
irq descriptor when a client looks up an IRQ from static
resources.
Fixes: d52fdbb735c3 ("smc91x: retrieve IRQ and trigger flags in a modern way")
Tested-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/base/platform.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -101,6 +101,15 @@ int platform_get_irq(struct platform_dev
}
r = platform_get_resource(dev, IORESOURCE_IRQ, num);
+ /*
+ * The resources may pass trigger flags to the irqs that need
+ * to be set up. It so happens that the trigger flags for
+ * IORESOURCE_BITS correspond 1-to-1 to the IRQF_TRIGGER*
+ * settings.
+ */
+ if (r && r->flags & IORESOURCE_BITS)
+ irqd_set_trigger_type(irq_get_irq_data(r->start),
+ r->flags & IORESOURCE_BITS);
return r ? r->start : -ENXIO;
#endif
Patches currently in stable-queue which might be from linus.walleij@xxxxxxxxxx are
queue-3.19/gpio-mvebu-fix-mask-unmask-managment-per-irq-chip-type.patch
queue-3.19/drivers-platform-parse-irq-flags-from-resources.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html