This is a note to let you know that I've just added the patch titled
tty/serial: at91: maxburst was missing for dma transfers
to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From a8d4e01637902311c5643b69a5c80e2805f04054 Mon Sep 17 00:00:00 2001
From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
Date: Thu, 16 Apr 2015 16:58:12 +0200
Subject: tty/serial: at91: maxburst was missing for dma transfers
Maxburst was not set when doing the dma slave configuration. This value
is checked by the recently introduced xdmac. It causes an error when
doing the slave configuration and so prevents from using dma.
Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # 3.12 and later
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/atmel_serial.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index d58fe4763d9e..27dade29646b 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -880,6 +880,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
config.direction = DMA_MEM_TO_DEV;
config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
config.dst_addr = port->mapbase + ATMEL_US_THR;
+ config.dst_maxburst = 1;
ret = dmaengine_slave_config(atmel_port->chan_tx,
&config);
@@ -1059,6 +1060,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
config.direction = DMA_DEV_TO_MEM;
config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
config.src_addr = port->mapbase + ATMEL_US_RHR;
+ config.src_maxburst = 1;
ret = dmaengine_slave_config(atmel_port->chan_rx,
&config);
--
2.3.6
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html