This is a note to let you know that I've just added the patch titled
serial: xilinx: Use platform_get_irq to get irq description structure
to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From 5c90c07b98c02198d9777a7c4f3047b0a94bf7ed Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xxxxxxxxxx>
Date: Mon, 13 Apr 2015 16:34:21 +0200
Subject: serial: xilinx: Use platform_get_irq to get irq description structure
For systems with CONFIG_SERIAL_OF_PLATFORM=y and device_type =
"serial"; property in DT of_serial.c driver maps and unmaps IRQ (because
driver probe fails). Then a driver is called but irq mapping is not
created that's why driver is failing again in again on request_irq().
Based on this use platform_get_irq() instead of platform_get_resource()
which is doing irq_desc allocation and driver itself can request IRQ.
Fix both xilinx serial drivers in the tree.
Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
CC: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/uartlite.c | 11 ++++++-----
drivers/tty/serial/xilinx_uartps.c | 12 ++++++------
2 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 708eead850b0..b1c6bd3d483f 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -632,7 +632,8 @@ MODULE_DEVICE_TABLE(of, ulite_of_match);
static int ulite_probe(struct platform_device *pdev)
{
- struct resource *res, *res2;
+ struct resource *res;
+ int irq;
int id = pdev->id;
#ifdef CONFIG_OF
const __be32 *prop;
@@ -646,11 +647,11 @@ static int ulite_probe(struct platform_device *pdev)
if (!res)
return -ENODEV;
- res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res2)
- return -ENODEV;
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0)
+ return -ENXIO;
- return ulite_assign(&pdev->dev, id, res->start, res2->start);
+ return ulite_assign(&pdev->dev, id, res->start, irq);
}
static int ulite_remove(struct platform_device *pdev)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index f218ec658f5d..3ddbac767db3 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1331,9 +1331,9 @@ static SIMPLE_DEV_PM_OPS(cdns_uart_dev_pm_ops, cdns_uart_suspend,
*/
static int cdns_uart_probe(struct platform_device *pdev)
{
- int rc, id;
+ int rc, id, irq;
struct uart_port *port;
- struct resource *res, *res2;
+ struct resource *res;
struct cdns_uart *cdns_uart_data;
cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
@@ -1380,9 +1380,9 @@ static int cdns_uart_probe(struct platform_device *pdev)
goto err_out_clk_disable;
}
- res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res2) {
- rc = -ENODEV;
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ rc = -ENXIO;
goto err_out_clk_disable;
}
@@ -1411,7 +1411,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
* and triggers invocation of the config_port() entry point.
*/
port->mapbase = res->start;
- port->irq = res2->start;
+ port->irq = irq;
port->dev = &pdev->dev;
port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
port->private_data = cdns_uart_data;
--
2.3.6
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html