Re: [PATCH v3 03/10] pci: drop some duplicate code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 24, 2015 at 06:33:57PM -0500, Bjorn Helgaas wrote:
> On Tue, Mar 24, 2015 at 04:42:35PM +0100, Michael S. Tsirkin wrote:
> > pci_msi_init_pci_dev and pci_msi_off share a lot of code.
> > This used to be justified since pci_msi_init_pci_dev
> > wasn't compiled in when CONFIG_PCI_MSI is off.
> > Now that it is, let's reuse code.
> > 
> > Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
> > ---
> >  drivers/pci/pci.c   | 24 +++++-------------------
> >  drivers/pci/probe.c | 11 ++++-------
> >  2 files changed, 9 insertions(+), 26 deletions(-)
> > 
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index 81f06e8..d5f297a 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -3106,26 +3106,12 @@ EXPORT_SYMBOL_GPL(pci_check_and_unmask_intx);
> >   */
> >  void pci_msi_off(struct pci_dev *dev)
> >  {
> > -	int pos;
> > -	u16 control;
> > +	if (dev->msi_cap)
> > +		pci_msi_set_enable(dev, 0);
> >  
> > -	/*
> > -	 * This looks like it could go in msi.c, but we need it even when
> > -	 * CONFIG_PCI_MSI=n.  For the same reason, we can't use
> > -	 * dev->msi_cap or dev->msix_cap here.
> > -	 */
> > -	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
> > -	if (pos) {
> > -		pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
> > -		control &= ~PCI_MSI_FLAGS_ENABLE;
> > -		pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
> > -	}
> > -	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
> > -	if (pos) {
> > -		pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
> > -		control &= ~PCI_MSIX_FLAGS_ENABLE;
> > -		pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
> > -	}
> > +	dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
> 
> I think the above line is superfluous, isn't it?  You already do the same
> in pci_msi_init_pci_dev() (below).

Ugh. Yea. I'll fix that up, thanks!

> > +	if (dev->msix_cap)
> > +		pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
> >  }
> >  EXPORT_SYMBOL_GPL(pci_msi_off);
> >  
> > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> > index 45d6d5c..baf8ddd 100644
> > --- a/drivers/pci/probe.c
> > +++ b/drivers/pci/probe.c
> > @@ -1489,17 +1489,14 @@ static void pci_msi_init_pci_dev(struct pci_dev *dev)
> >  	INIT_LIST_HEAD(&dev->msi_list);
> >  #endif
> >  
> > +	dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
> > +	dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
> > +
> >  	/* Disable the msi hardware to avoid screaming interrupts
> >  	 * during boot.  This is the power on reset default so
> >  	 * usually this should be a noop.
> >  	 */
> > -	dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI);
> > -	if (dev->msi_cap)
> > -		pci_msi_set_enable(dev, 0);
> > -
> > -	dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX);
> > -	if (dev->msix_cap)
> > -		pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
> > +	pci_msi_off(dev);
> >  }
> >  
> >  static void pci_init_capabilities(struct pci_dev *dev)
> > -- 
> > MST
> > 
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]