This is a note to let you know that I've just added the patch titled
usb: common: otg-fsm: only signal connect after switching to
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-next branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will also be merged in the next major kernel release
during the merge window.
If you have any questions about this process, please let me know.
>From 990919cad55a8c38fc73b0a6a0c9e5e4e927a5f8 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Date: Thu, 12 Mar 2015 09:47:53 +0800
Subject: usb: common: otg-fsm: only signal connect after switching to
peripheral
We should signal connect (pull up dp) after we have already
at peripheral mode, otherwise, the dp may be toggled due to
we reset controller or do disconnect during the initialization
for peripheral, then, the host may be confused during the
enumeration, eg, it finds the reset can't succeed, but the
device is still there, see below error message.
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: cannot reset port 1 (err = -32)
hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-0:1.0: unable to enumerate USB device on port 1
Fixes: the issue existed when the otg fsm code was added.
Cc: <stable@xxxxxxxxxxxxxxx> # v3.16+
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
drivers/usb/common/usb-otg-fsm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
index c6b35b77dab7..61d538aa2346 100644
--- a/drivers/usb/common/usb-otg-fsm.c
+++ b/drivers/usb/common/usb-otg-fsm.c
@@ -150,9 +150,9 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
break;
case OTG_STATE_B_PERIPHERAL:
otg_chrg_vbus(fsm, 0);
- otg_loc_conn(fsm, 1);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_GADGET);
+ otg_loc_conn(fsm, 1);
break;
case OTG_STATE_B_WAIT_ACON:
otg_chrg_vbus(fsm, 0);
@@ -213,10 +213,10 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
break;
case OTG_STATE_A_PERIPHERAL:
- otg_loc_conn(fsm, 1);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_GADGET);
otg_drv_vbus(fsm, 1);
+ otg_loc_conn(fsm, 1);
otg_add_timer(fsm, A_BIDL_ADIS);
break;
case OTG_STATE_A_WAIT_VFALL:
--
2.3.4
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html