[PATCH 3.18 130/154] drm/i915: avoid processing spurious/shared interrupts in low-power states

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Imre Deak <imre.deak@xxxxxxxxx>

commit 2dd2a883aad7c852400027c2261bcab69d9e238e upstream.

Atm, it's possible that the interrupt handler is called when the device
is in D3 or some other low-power state. It can be due to another device
that is still in D0 state and shares the interrupt line with i915, or on
some platforms there could be spurious interrupts even without sharing
the interrupt line. The latter case was reported by Klaus Ethgen using a
Lenovo x61p machine (gen 4). He noticed this issue via a system
suspend/resume hang and bisected it to the following commit:

commit e11aa362308f5de467ce355a2a2471321b15a35c
Author: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
Date:   Wed Jun 18 09:52:55 2014 -0700

    drm/i915: use runtime irq suspend/resume in freeze/thaw

This is a problem, since in low-power states IIR will always read
0xffffffff resulting in an endless IRQ servicing loop.

Fix this by handling interrupts only when the driver explicitly enables
them and so it's guaranteed that the interrupt registers return a valid
value.

Note that this issue existed even before the above commit, since during
runtime suspend/resume we never unregistered the handler.

v2:
- clarify the purpose of smp_mb() vs. synchronize_irq() in the
  code comment (Chris)

v3:
- no need for an explicit smp_mb(), we can assume that synchronize_irq()
  and the mmio read/writes in the install hooks provide for this (Daniel)
- remove code comment as the remaining synchronize_irq() is self
  explanatory (Daniel)

v4:
- drm_irq_uninstall() implies synchronize_irq(), so no need to call it
  explicitly (Daniel)

Reference: https://lkml.org/lkml/2015/2/11/205
Reported-and-bisected-by: Klaus Ethgen <Klaus@xxxxxxxxx>
Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/i915_irq.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 9ba1177..0ab77f3 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2123,6 +2123,9 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)
 	u32 iir, gt_iir, pm_iir;
 	irqreturn_t ret = IRQ_NONE;
 
+	if (!intel_irqs_enabled(dev_priv))
+		return IRQ_NONE;
+
 	while (true) {
 		/* Find, clear, then process each source of interrupt */
 
@@ -2167,6 +2170,9 @@ static irqreturn_t cherryview_irq_handler(int irq, void *arg)
 	u32 master_ctl, iir;
 	irqreturn_t ret = IRQ_NONE;
 
+	if (!intel_irqs_enabled(dev_priv))
+		return IRQ_NONE;
+
 	for (;;) {
 		master_ctl = I915_READ(GEN8_MASTER_IRQ) & ~GEN8_MASTER_IRQ_CONTROL;
 		iir = I915_READ(VLV_IIR);
@@ -2455,6 +2461,9 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg)
 	u32 de_iir, gt_iir, de_ier, sde_ier = 0;
 	irqreturn_t ret = IRQ_NONE;
 
+	if (!intel_irqs_enabled(dev_priv))
+		return IRQ_NONE;
+
 	/* We get interrupts on unclaimed registers, so check for this before we
 	 * do any I915_{READ,WRITE}. */
 	intel_uncore_check_errors(dev);
@@ -2525,6 +2534,9 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
 	uint32_t tmp = 0;
 	enum pipe pipe;
 
+	if (!intel_irqs_enabled(dev_priv))
+		return IRQ_NONE;
+
 	master_ctl = I915_READ(GEN8_MASTER_IRQ);
 	master_ctl &= ~GEN8_MASTER_IRQ_CONTROL;
 	if (!master_ctl)
@@ -4052,6 +4064,9 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg)
 		I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
 		I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
 
+	if (!intel_irqs_enabled(dev_priv))
+		return IRQ_NONE;
+
 	iir = I915_READ16(IIR);
 	if (iir == 0)
 		return IRQ_NONE;
@@ -4238,6 +4253,9 @@ static irqreturn_t i915_irq_handler(int irq, void *arg)
 		I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
 	int pipe, ret = IRQ_NONE;
 
+	if (!intel_irqs_enabled(dev_priv))
+		return IRQ_NONE;
+
 	iir = I915_READ(IIR);
 	do {
 		bool irq_received = (iir & ~flip_mask) != 0;
@@ -4466,6 +4484,9 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
 		I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
 		I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
 
+	if (!intel_irqs_enabled(dev_priv))
+		return IRQ_NONE;
+
 	iir = I915_READ(IIR);
 
 	for (;;) {
@@ -4777,4 +4798,5 @@ void intel_runtime_pm_restore_interrupts(struct drm_device *dev)
 	dev_priv->pm._irqs_disabled = false;
 	dev->driver->irq_preinstall(dev);
 	dev->driver->irq_postinstall(dev);
+	synchronize_irq(dev_priv->dev->irq);
 }
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]