From: Guenter Roeck <linux@xxxxxxxxxxxx>
[ Upstream commit 54da5a8be3c1e924c35480eb44c6e9b275f6444e ]
phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex)
to find a valid entry in the settings array for the given speed
and duplex value. For full duplex 1000baseT, this will return
the first matching entry, which is the entry for 1000baseKX_Full.
If the phy eee does not support 1000baseKX_Full, this entry will not
match, causing phy_init_eee to fail for no good reason.
Fixes: 9a9c56cb34e6 ("net: phy: fix a bug when verify the EEE support")
Fixes: 3e7077067e80c ("phy: Expand phy speed/duplex settings array")
Cc: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sasha.levin@xxxxxxxxxx>
---
drivers/net/phy/phy.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 767cd11..dc1f6f0 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -236,6 +236,25 @@ static inline unsigned int phy_find_valid(unsigned int idx, u32 features)
}
/**
+ * phy_check_valid - check if there is a valid PHY setting which matches
+ * speed, duplex, and feature mask
+ * @speed: speed to match
+ * @duplex: duplex to match
+ * @features: A mask of the valid settings
+ *
+ * Description: Returns true if there is a valid setting, false otherwise.
+ */
+static inline bool phy_check_valid(int speed, int duplex, u32 features)
+{
+ unsigned int idx;
+
+ idx = phy_find_valid(phy_find_setting(speed, duplex), features);
+
+ return settings[idx].speed == speed && settings[idx].duplex == duplex &&
+ (settings[idx].setting & features);
+}
+
+/**
* phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
* @phydev: the target phy_device struct
*
@@ -1042,7 +1061,6 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
int eee_lp, eee_cap, eee_adv;
u32 lp, cap, adv;
int status;
- unsigned int idx;
/* Read phy status to properly get the right settings */
status = phy_read_status(phydev);
@@ -1074,8 +1092,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
- idx = phy_find_setting(phydev->speed, phydev->duplex);
- if (!(lp & adv & settings[idx].setting))
+ if (!phy_check_valid(phydev->speed, phydev->duplex, lp & adv))
goto eee_exit_err;
if (clk_stop_enable) {
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html