3.13.11-ckt17 -stable review patch. If anyone has any objections, please let me know.
------------------
From: "Ahmed S. Darwish" <ahmed.darwish@xxxxxxxxx>
commit 14c10c2a1dd8eb8e00b750b521753260befa2789 upstream.
On some x86 laptops, plugging a Kvaser device again after an
unplug makes the firmware always ignore the very first command.
For such a case, provide some room for retries instead of
completely exiting the driver init code.
Signed-off-by: Ahmed S. Darwish <ahmed.darwish@xxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Kamal Mostafa <kamal@xxxxxxxxxxxxx>
---
drivers/net/can/usb/kvaser_usb.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index b91f58e..5ea0de8 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c
@@ -1578,7 +1578,7 @@ static int kvaser_usb_probe(struct usb_interface *intf,
{
struct kvaser_usb *dev;
int err = -ENOMEM;
- int i;
+ int i, retry = 3;
dev = devm_kzalloc(&intf->dev, sizeof(*dev), GFP_KERNEL);
if (!dev)
@@ -1596,7 +1596,15 @@ static int kvaser_usb_probe(struct usb_interface *intf,
usb_set_intfdata(intf, dev);
- err = kvaser_usb_get_software_info(dev);
+ /* On some x86 laptops, plugging a Kvaser device again after
+ * an unplug makes the firmware always ignore the very first
+ * command. For such a case, provide some room for retries
+ * instead of completely exiting the driver.
+ */
+ do {
+ err = kvaser_usb_get_software_info(dev);
+ } while (--retry && err == -ETIMEDOUT);
+
if (err) {
dev_err(&intf->dev,
"Cannot get software infos, error %d\n", err);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html