When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps
going with the suspend, resulting in a period where the power domain is
off, but the gadget driver remains connected. Within this time frame,
invoking vbus_event_work() will cause an error as it attempts to access
DWC3 registers for endpoint disabling after the power domain has been
completely shut down.
Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the
controller and proceeds with a soft connect.
CC: stable@xxxxxxxxxxxxxxx
Signed-off-by: Kuen-Han Tsai <khtsai@xxxxxxxxxx>
---
Kernel panic - not syncing: Asynchronous SError Interrupt
Workqueue: events vbus_event_work
Call trace:
dump_backtrace+0xf4/0x118
show_stack+0x18/0x24
dump_stack_lvl+0x60/0x7c
dump_stack+0x18/0x3c
panic+0x16c/0x390
nmi_panic+0xa4/0xa8
arm64_serror_panic+0x6c/0x94
do_serror+0xc4/0xd0
el1h_64_error_handler+0x34/0x48
el1h_64_error+0x68/0x6c
readl+0x4c/0x8c
__dwc3_gadget_ep_disable+0x48/0x230
dwc3_gadget_ep_disable+0x50/0xc0
usb_ep_disable+0x44/0xe4
ffs_func_eps_disable+0x64/0xc8
ffs_func_set_alt+0x74/0x368
ffs_func_disable+0x18/0x28
composite_disconnect+0x90/0xec
configfs_composite_disconnect+0x64/0x88
usb_gadget_disconnect_locked+0xc0/0x168
vbus_event_work+0x3c/0x58
process_one_work+0x1e4/0x43c
worker_thread+0x25c/0x430
kthread+0x104/0x1d4
ret_from_fork+0x10/0x20
---
drivers/usb/dwc3/core.c | 10 +++++++---
drivers/usb/dwc3/gadget.c | 22 +++++++++-------------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 66a08b527165..d64d17677bdb 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -2387,7 +2387,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
{
u32 reg;
- int i;
+ int i, ret;
if (!pm_runtime_suspended(dwc->dev) && !PMSG_IS_AUTO(msg)) {
dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) &
@@ -2406,7 +2406,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
case DWC3_GCTL_PRTCAP_DEVICE:
if (pm_runtime_suspended(dwc->dev))
break;
- dwc3_gadget_suspend(dwc);
+ ret = dwc3_gadget_suspend(dwc);
+ if (ret)
+ return ret
synchronize_irq(dwc->irq_gadget);
dwc3_core_exit(dwc);
break;
@@ -2441,7 +2443,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
break;
if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
- dwc3_gadget_suspend(dwc);
+ ret = dwc3_gadget_suspend(dwc);
+ if (ret)
+ return ret;
synchronize_irq(dwc->irq_gadget);
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 89a4dc8ebf94..316c1589618e 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -4776,26 +4776,22 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
int ret;
ret = dwc3_gadget_soft_disconnect(dwc);
- if (ret)
- goto err;
-
- spin_lock_irqsave(&dwc->lock, flags);
- if (dwc->gadget_driver)
- dwc3_disconnect_gadget(dwc);
- spin_unlock_irqrestore(&dwc->lock, flags);
-
- return 0;
-
-err:
/*
* Attempt to reset the controller's state. Likely no
* communication can be established until the host
* performs a port reset.
*/
- if (dwc->softconnect)
+ if (ret && dwc->softconnect) {
dwc3_gadget_soft_connect(dwc);
+ return ret;
+ }
- return ret;
+ spin_lock_irqsave(&dwc->lock, flags);
+ if (dwc->gadget_driver)
+ dwc3_disconnect_gadget(dwc);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
+ return 0;
}
int dwc3_gadget_resume(struct dwc3 *dwc)
--
2.49.0.395.g12beb8f557-goog
