Historically, the Vertex Fetcher unit has not been an L3 client. That meant that, when a buffer containing vertex data was written to, it was necessary to issue a PIPE_CONTROL::VF Cache Invalidate to invalidate any VF L2 cachelines associated with that buffer, so the new value would be properly read from memory. Since Tigerlake and later, VERTEX_BUFFER_STATE and 3DSTATE_INDEX_BUFFER have included an "L3 Bypass Enable" bit which userspace drivers can set to request that the vertex fetcher unit snoop L3. However, unlike most true L3 clients, the "VF Cache Invalidate" bit continues to only invalidate the VF L2 cache - and not any associated L3 lines. To handle that, PIPE_CONTROL has a new "L3 Read Only Cache Invalidation Bit", which according to the docs, "controls the invalidation of the Geometry streams cached in L3 cache at the top of the pipe." In other words, the vertex and index buffer data that gets cached in L3 when "L3 Bypass Disable" is set. Mesa always sets L3 Bypass Disable so that the VF unit snoops L3, and whenever it issues a VF Cache Invalidate, it also issues a L3 Read Only Cache Invalidate so that both L2 and L3 vertex data is invalidated. xe is issuing VF cache invalidates too (which handles cases like CPU writes to a buffer between GPU batches). Because userspace may enable L3 snooping, it needs to issue an L3 Read Only Cache Invalidate as well. Fixes significant flickering in Firefox on Meteorlake, which was writing to vertex buffers via the CPU between batches; the missing L3 Read Only invalidates were causing the vertex fetcher to read stale data from L3. References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4460 Cc: stable@xxxxxxxxxxxxxxx # v6.13+ --- drivers/gpu/drm/xe/instructions/xe_gpu_commands.h | 1 + drivers/gpu/drm/xe/xe_ring_ops.c | 13 +++++++++---- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/xe/instructions/xe_gpu_commands.h b/drivers/gpu/drm/xe/instructions/xe_gpu_commands.h index a255946b6f77e..8cfcd3360896c 100644 --- a/drivers/gpu/drm/xe/instructions/xe_gpu_commands.h +++ b/drivers/gpu/drm/xe/instructions/xe_gpu_commands.h @@ -41,6 +41,7 @@ #define GFX_OP_PIPE_CONTROL(len) ((0x3<<29)|(0x3<<27)|(0x2<<24)|((len)-2)) +#define PIPE_CONTROL0_L3_READ_ONLY_CACHE_INVALIDATE BIT(10) /* gen12 */ #define PIPE_CONTROL0_HDC_PIPELINE_FLUSH BIT(9) /* gen12 */ #define PIPE_CONTROL_COMMAND_CACHE_INVALIDATE (1<<29) diff --git a/drivers/gpu/drm/xe/xe_ring_ops.c b/drivers/gpu/drm/xe/xe_ring_ops.c index 0c230ee53bba5..9d8901a33205a 100644 --- a/drivers/gpu/drm/xe/xe_ring_ops.c +++ b/drivers/gpu/drm/xe/xe_ring_ops.c @@ -141,7 +141,8 @@ emit_pipe_control(u32 *dw, int i, u32 bit_group_0, u32 bit_group_1, u32 offset, static int emit_pipe_invalidate(u32 mask_flags, bool invalidate_tlb, u32 *dw, int i) { - u32 flags = PIPE_CONTROL_CS_STALL | + u32 flags0 = 0; + u32 flags1 = PIPE_CONTROL_CS_STALL | PIPE_CONTROL_COMMAND_CACHE_INVALIDATE | PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE | PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE | @@ -152,11 +153,15 @@ static int emit_pipe_invalidate(u32 mask_flags, bool invalidate_tlb, u32 *dw, PIPE_CONTROL_STORE_DATA_INDEX; if (invalidate_tlb) - flags |= PIPE_CONTROL_TLB_INVALIDATE; + flags1 |= PIPE_CONTROL_TLB_INVALIDATE; - flags &= ~mask_flags; + flags1 &= ~mask_flags; - return emit_pipe_control(dw, i, 0, flags, LRC_PPHWSP_FLUSH_INVAL_SCRATCH_ADDR, 0); + if (flags1 & PIPE_CONTROL_VF_CACHE_INVALIDATE) + flags0 |= PIPE_CONTROL0_L3_READ_ONLY_CACHE_INVALIDATE; + + return emit_pipe_control(dw, i, flags0, flags1, + LRC_PPHWSP_FLUSH_INVAL_SCRATCH_ADDR, 0); } static int emit_store_imm_ppgtt_posted(u64 addr, u64 value, -- 2.48.1
