Hi Judith, Ulf, On Wed, 2025-02-05 at 13:39 -0600, Judith Mendez wrote: > Hi all, > > On 1/27/25 2:12 PM, Josua Mayer wrote: > > This reverts commit 941a7abd4666912b84ab209396fdb54b0dae685d. > > > > This commit uses presence of device-tree properties vmmc-supply and > > vqmmc-supply for deciding whether to enable a quirk affecting timing of > > clock and data. > > The intention was to address issues observed with eMMC and SD on AM62 > > platforms. > > > > This new quirk is however also enabled for AM64 breaking microSD access > > on the SolidRun HimmingBoard-T which is supported in-tree since v6.11, > > causing a regression. During boot microSD initialization now fails with > > the error below: > > > > [ 2.008520] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit > > [ 2.115348] mmc1: error -110 whilst initialising SD card > > > > The heuristics for enabling the quirk are clearly not correct as they > > break at least one but potentially many existing boards. > > > > Revert the change and restore original behaviour until a more > > appropriate method of selecting the quirk is derived. > > > Somehow I missed these emails, apologies. > > Thanks for reporting this issue Josua. > > We do need this patch for am62x devices since it fixes timing issues > with a variety of SD cards on those boards, but if there is a > regression, too bad, patch had to be reverted. > > I will look again into how to implement this quirk, I think using the > voltage regulator nodes to discover if we need this quirk might not have > been a good idea, based on your explanation. I believe I did test the > patch on am64x SK and am64x EVM boards and saw no boot issue there, > so the issue seems related to the voltage regulator nodes existing in DT > (the heuristics for enabling the quirk) as you call it. > > Again, thanks for reporting, will look into fixing this issue for am62x > again soon. does it mean, that 14afef2333af ("arm64: dts: ti: k3-am62-main: Update otap/itap values") has to be reverted as well, for the time being? -- Alexander Sverdlin Siemens AG www.siemens.com