5.15-stable review patch. If anyone has any objections, please let me know. ------------------ From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> commit a321d163de3d8aa38a6449ab2becf4b1581aed96 upstream. There are multiple places from where the recovery work gets scheduled asynchronously. Also, there are multiple places where the caller waits synchronously for the recovery to be completed. One such place is during the PM shutdown() callback. If the device is not alive during recovery_work, it will try to reset the device using pci_reset_function(). This function internally will take the device_lock() first before resetting the device. By this time, if the lock has already been acquired, then recovery_work will get stalled while waiting for the lock. And if the lock was already acquired by the caller which waits for the recovery_work to be completed, it will lead to deadlock. This is what happened on the X1E80100 CRD device when the device died before shutdown() callback. Driver core calls the driver's shutdown() callback while holding the device_lock() leading to deadlock. And this deadlock scenario can occur on other paths as well, like during the PM suspend() callback, where the driver core would hold the device_lock() before calling driver's suspend() callback. And if the recovery_work was already started, it could lead to deadlock. This is also observed on the X1E80100 CRD. So to fix both issues, use pci_try_reset_function() in recovery_work. This function first checks for the availability of the device_lock() before trying to reset the device. If the lock is available, it will acquire it and reset the device. Otherwise, it will return -EAGAIN. If that happens, recovery_work will fail with the error message "Recovery failed" as not much could be done. Cc: stable@xxxxxxxxxxxxxxx # 5.12 Reported-by: Johan Hovold <johan@xxxxxxxxxx> Closes: https://lore.kernel.org/mhi/Z1me8iaK7cwgjL92@xxxxxxxxxxxxxxxxxxxx Fixes: 7389337f0a78 ("mhi: pci_generic: Add suspend/resume/recovery procedure") Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx> Tested-by: Johan Hovold <johan+linaro@xxxxxxxxxx> Analyzed-by: Johan Hovold <johan@xxxxxxxxxx> Link: https://lore.kernel.org/mhi/Z2KKjWY2mPen6GPL@xxxxxxxxxxxxxxxxxxxx/ Reviewed-by: Loic Poulain <loic.poulain@xxxxxxxxxx> Link: https://lore.kernel.org/r/20250108-mhi_recovery_fix-v1-1-a0a00a17da46@xxxxxxxxxx Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/bus/mhi/host/pci_generic.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/drivers/bus/mhi/host/pci_generic.c +++ b/drivers/bus/mhi/host/pci_generic.c @@ -732,8 +732,9 @@ static void mhi_pci_recovery_work(struct err_unprepare: mhi_unprepare_after_power_down(mhi_cntrl); err_try_reset: - if (pci_reset_function(pdev)) - dev_err(&pdev->dev, "Recovery failed\n"); + err = pci_try_reset_function(pdev); + if (err) + dev_err(&pdev->dev, "Recovery failed: %d\n", err); } static void health_check(struct timer_list *t)
