6.12-stable review patch. If anyone has any objections, please let me know. ------------------ From: Imre Deak <imre.deak@xxxxxxxxx> commit b9275eabe31e6679ae12c46a4a0a18d622db4570 upstream. At the end of a 128b/132b link training sequence, the HW expects the transcoder training pattern to be set to TPS2 and from that to normal mode (disabling the training pattern). Transitioning from TPS1 directly to normal mode leaves the transcoder in a stuck state, resulting in page-flip timeouts later in the modeset sequence. Atm, in case of a failure during link training, the transcoder may be still set to output the TPS1 pattern. Later the transcoder is then set from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading to modeset failures later as described above. Fix this by setting the training patter to TPS2, if the link training failed at any point. The clue in the specification about the above HW behavior is the explicit mention that TPS2 must be set after the link training sequence (and there isn't a similar requirement specified for the 8b/10b link training), see the Bspec links below. v2: Add bspec aspect/link to the commit log. (Jani) Bspec: 54128, 65448, 68849 Cc: stable@xxxxxxxxxxxxxxx # v5.18+ Cc: Jani Nikula <jani.nikula@xxxxxxxxx> Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx> Acked-by: Jani Nikula <jani.nikula@xxxxxxxxx> Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@xxxxxxxxx Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx> (cherry picked from commit 8b4bbaf8ddc1f68f3ee96a706f65fdb1bcd9d355) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_dp_link_training.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c @@ -1561,7 +1561,7 @@ intel_dp_128b132b_link_train(struct inte if (wait_for(intel_dp_128b132b_intra_hop(intel_dp, crtc_state) == 0, 500)) { lt_err(intel_dp, DP_PHY_DPRX, "128b/132b intra-hop not clear\n"); - return false; + goto out; } if (intel_dp_128b132b_lane_eq(intel_dp, crtc_state) && @@ -1573,6 +1573,19 @@ intel_dp_128b132b_link_train(struct inte passed ? "passed" : "failed", crtc_state->port_clock, crtc_state->lane_count); +out: + /* + * Ensure that the training pattern does get set to TPS2 even in case + * of a failure, as is the case at the end of a passing link training + * and what is expected by the transcoder. Leaving TPS1 set (and + * disabling the link train mode in DP_TP_CTL later from TPS1 directly) + * would result in a stuck transcoder HW state and flip-done timeouts + * later in the modeset sequence. + */ + if (!passed) + intel_dp_program_link_training_pattern(intel_dp, crtc_state, + DP_PHY_DPRX, DP_TRAINING_PATTERN_2); + return passed; }
