[PATCH 6.6 017/152] gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Artur Weber <aweber.kernel@xxxxxxxxx>

[ Upstream commit de1d0d160f64ee76df1d364d521b2faf465a091c ]

The GPIO lock/unlock functions clear/write a bit to the relevant
register for each bank. However, due to an oversight the bit that
was being written was based on the total GPIO number, not the index
of the GPIO within the relevant bank, causing it to fail for any
GPIO above 32 (thus any GPIO for banks above bank 0).

Fix lock/unlock for these banks by using the correct bit.

Fixes: bdb93c03c550 ("gpio: bcm281xx: Centralize register locking")
Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
Reviewed-by: Markus Mayer <mmayer@xxxxxxxxxxxx>
Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-1-409135eab780@xxxxxxxxx
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/gpio/gpio-bcm-kona.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 5321ef98f4427..77bd4ec93a231 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -86,11 +86,12 @@ static void bcm_kona_gpio_lock_gpio(struct bcm_kona_gpio *kona_gpio,
 	u32 val;
 	unsigned long flags;
 	int bank_id = GPIO_BANK(gpio);
+	int bit = GPIO_BIT(gpio);
 
 	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
 
 	val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
-	val |= BIT(gpio);
+	val |= BIT(bit);
 	bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
 
 	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
@@ -102,11 +103,12 @@ static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
 	u32 val;
 	unsigned long flags;
 	int bank_id = GPIO_BANK(gpio);
+	int bit = GPIO_BIT(gpio);
 
 	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
 
 	val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
-	val &= ~BIT(gpio);
+	val &= ~BIT(bit);
 	bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
 
 	raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
-- 
2.39.5







[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux