On Tue, 18 Feb 2025, Imre Deak <imre.deak@xxxxxxxxx> wrote:
> At the end of a 128b/132b link training sequence, the HW expects the
> transcoder training pattern to be set to TPS2 and from that to normal
> mode (disabling the training pattern). Transitioning from TPS1 directly
> to normal mode leaves the transcoder in a stuck state, resulting in
> page-flip timeouts later in the modeset sequence.
>
> Atm, in case of a failure during link training, the transcoder may be
> still set to output the TPS1 pattern. Later the transcoder is then set
> from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading
> to modeset failures later as described above. Fix this by setting the
> training patter to TPS2, if the link training failed at any point.
>
> Cc: stable@xxxxxxxxxxxxxxx # v5.18+
> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
No bspec link for this?
Acked-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> ---
> .../gpu/drm/i915/display/intel_dp_link_training.c | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> index 3cc06c916017d..11953b03bb6aa 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> @@ -1563,7 +1563,7 @@ intel_dp_128b132b_link_train(struct intel_dp *intel_dp,
>
> if (wait_for(intel_dp_128b132b_intra_hop(intel_dp, crtc_state) == 0, 500)) {
> lt_err(intel_dp, DP_PHY_DPRX, "128b/132b intra-hop not clear\n");
> - return false;
> + goto out;
> }
>
> if (intel_dp_128b132b_lane_eq(intel_dp, crtc_state) &&
> @@ -1575,6 +1575,19 @@ intel_dp_128b132b_link_train(struct intel_dp *intel_dp,
> passed ? "passed" : "failed",
> crtc_state->port_clock, crtc_state->lane_count);
>
> +out:
> + /*
> + * Ensure that the training pattern does get set to TPS2 even in case
> + * of a failure, as is the case at the end of a passing link training
> + * and what is expected by the transcoder. Leaving TPS1 set (and
> + * disabling the link train mode in DP_TP_CTL later from TPS1 directly)
> + * would result in a stuck transcoder HW state and flip-done timeouts
> + * later in the modeset sequence.
> + */
> + if (!passed)
> + intel_dp_program_link_training_pattern(intel_dp, crtc_state,
> + DP_PHY_DPRX, DP_TRAINING_PATTERN_2);
> +
> return passed;
> }
--
Jani Nikula, Intel
