According to the chip manual, the I2C register access type of
Loongson-2K2000/LS7A is "B", so we can only access registers in byte
form (readb/writeb).
Although Loongson-2K0500/Loongson-2K1000 do not have similar
constraints, register accesses in byte form also behave correctly.
Also, in hardware, the frequency division registers are defined as two
separate registers (high 8-bit and low 8-bit), so we just access them
directly as bytes.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 015e61f0bffd ("i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller")
Co-developed-by: Hongliang Wang <wanghongliang@xxxxxxxxxxx>
Signed-off-by: Hongliang Wang <wanghongliang@xxxxxxxxxxx>
Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
---
drivers/i2c/busses/i2c-ls2x.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-ls2x.c b/drivers/i2c/busses/i2c-ls2x.c
index 8821cac3897b..a4dbbf4ca036 100644
--- a/drivers/i2c/busses/i2c-ls2x.c
+++ b/drivers/i2c/busses/i2c-ls2x.c
@@ -10,6 +10,7 @@
* Rewritten for mainline by Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
*/
+#include <linux/bitfield.h>
#include <linux/bits.h>
#include <linux/completion.h>
#include <linux/device.h>
@@ -26,7 +27,8 @@
#include <linux/units.h>
/* I2C Registers */
-#define I2C_LS2X_PRER 0x0 /* Freq Division Register(16 bits) */
+#define I2C_LS2X_PRER_LO 0x0 /* Freq Division Low Byte Register */
+#define I2C_LS2X_PRER_HI 0x1 /* Freq Division High Byte Register */
#define I2C_LS2X_CTR 0x2 /* Control Register */
#define I2C_LS2X_TXR 0x3 /* Transport Data Register */
#define I2C_LS2X_RXR 0x3 /* Receive Data Register */
@@ -93,6 +95,7 @@ static irqreturn_t ls2x_i2c_isr(int this_irq, void *dev_id)
*/
static void ls2x_i2c_adjust_bus_speed(struct ls2x_i2c_priv *priv)
{
+ u16 val;
struct i2c_timings *t = &priv->i2c_t;
struct device *dev = priv->adapter.dev.parent;
u32 acpi_speed = i2c_acpi_find_bus_speed(dev);
@@ -105,8 +108,9 @@ static void ls2x_i2c_adjust_bus_speed(struct ls2x_i2c_priv *priv)
t->bus_freq_hz = LS2X_I2C_FREQ_STD;
/* Calculate and set i2c frequency. */
- writew(LS2X_I2C_PCLK_FREQ / (5 * t->bus_freq_hz) - 1,
- priv->base + I2C_LS2X_PRER);
+ val = LS2X_I2C_PCLK_FREQ / (5 * t->bus_freq_hz) - 1;
+ writeb(FIELD_GET(GENMASK(7, 0), val), priv->base + I2C_LS2X_PRER_LO);
+ writeb(FIELD_GET(GENMASK(15, 8), val), priv->base + I2C_LS2X_PRER_HI);
}
static void ls2x_i2c_init(struct ls2x_i2c_priv *priv)
base-commit: 7e45b505e699f4c80aa8bf79b4ea2a5f5a66bb51
--
2.47.1
