On Thu, 13. Feb 15:58, Heikki Krogerus wrote:
> On Thu, Feb 06, 2025 at 09:43:15PM +0300, Fedor Pchelkin wrote:
> > It is observed that on some systems an initial PPM reset during the boot
> > phase can trigger a timeout:
> >
> > [ 6.482546] ucsi_acpi USBC000:00: failed to reset PPM!
> > [ 6.482551] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed
> >
> > Still, increasing the timeout value, albeit being the most straightforward
> > solution, eliminates the problem: the initial PPM reset may take up to
> > ~8000-10000ms on some Lenovo laptops. When it is reset after the above
> > period of time (or even if ucsi_reset_ppm() is not called overall), UCSI
> > works as expected.
> >
> > Moreover, if the ucsi_acpi module is loaded/unloaded manually after the
> > system has booted, reading the CCI values and resetting the PPM works
> > perfectly, without any timeout. Thus it's only a boot-time issue.
> >
> > The reason for this behavior is not clear but it may be the consequence
> > of some tricks that the firmware performs or be an actual firmware bug.
> > As a workaround, increase the timeout to avoid failing the UCSI
> > initialization prematurely.
> >
> > Fixes: b1b59e16075f ("usb: typec: ucsi: Increase command completion timeout value")
> > Cc: stable@xxxxxxxxxxxxxxx
> > Signed-off-by: Fedor Pchelkin <boddah8794@xxxxxxxxx>
>
> Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Thanks for review!
Should I respin the series or it can be taken as is despite being
initially tagged an RFC material?
