Enable the retain_ff_enable bit of GDSCR only if the GDSC is already ON.
Once the GDSCR moves to HW control, SW no longer can determine the state
of the GDSCR and setting the retain_ff bit could destroy all the register
contents we intended to save.
Therefore, move the retain_ff configuration before switching the GDSC to
HW trigger mode.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 173722995cdb ("clk: qcom: gdsc: Add support to enable retention of GSDCR")
Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
---
drivers/clk/qcom/gdsc.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
index fa5fe4c2a2ee7786c2e8858f3e41301f639e5d59..1fd40b755082a4658cca581e920635e1bdfbc922 100644
--- a/drivers/clk/qcom/gdsc.c
+++ b/drivers/clk/qcom/gdsc.c
@@ -292,6 +292,9 @@ static int gdsc_enable(struct generic_pm_domain *domain)
*/
udelay(1);
+ if (sc->flags & RETAIN_FF_ENABLE)
+ gdsc_retain_ff_on(sc);
+
/* Turn on HW trigger mode if supported */
if (sc->flags & HW_CTRL) {
ret = gdsc_hwctrl(sc, true);
@@ -308,9 +311,6 @@ static int gdsc_enable(struct generic_pm_domain *domain)
udelay(1);
}
- if (sc->flags & RETAIN_FF_ENABLE)
- gdsc_retain_ff_on(sc);
-
return 0;
}
@@ -457,13 +457,6 @@ static int gdsc_init(struct gdsc *sc)
goto err_disable_supply;
}
- /* Turn on HW trigger mode if supported */
- if (sc->flags & HW_CTRL) {
- ret = gdsc_hwctrl(sc, true);
- if (ret < 0)
- goto err_disable_supply;
- }
-
/*
* Make sure the retain bit is set if the GDSC is already on,
* otherwise we end up turning off the GDSC and destroying all
@@ -471,6 +464,14 @@ static int gdsc_init(struct gdsc *sc)
*/
if (sc->flags & RETAIN_FF_ENABLE)
gdsc_retain_ff_on(sc);
+
+ /* Turn on HW trigger mode if supported */
+ if (sc->flags & HW_CTRL) {
+ ret = gdsc_hwctrl(sc, true);
+ if (ret < 0)
+ goto err_disable_supply;
+ }
+
} else if (sc->flags & ALWAYS_ON) {
/* If ALWAYS_ON GDSCs are not ON, turn them ON */
gdsc_enable(&sc->pd);
--
2.48.1
