Clear reset status flag, to keep error status register clean after reset
(ad3552r manual, rev B table 38).
Reset error flag was left to 1, so debugging registers, the "Error
Status Register" was dirty (0x01). It is important to clear this bit, so
if there is any reset event over normal working mode, it is possible to
detect it.
Fixes: 8f2b54824b28 ("drivers:iio:dac: Add AD3552R driver support")
Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
Link: https://patch.msgid.link/20250125-wip-bl-ad3552r-clear-reset-v2-1-aa3a27f3ff8c@xxxxxxxxxxxx
Cc: <Stable@xxxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
drivers/iio/dac/ad3552r.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
index e7206af53af6..7944f5c1d264 100644
--- a/drivers/iio/dac/ad3552r.c
+++ b/drivers/iio/dac/ad3552r.c
@@ -410,6 +410,12 @@ static int ad3552r_reset(struct ad3552r_desc *dac)
return ret;
}
+ /* Clear reset error flag, see ad3552r manual, rev B table 38. */
+ ret = ad3552r_write_reg(dac, AD3552R_REG_ADDR_ERR_STATUS,
+ AD3552R_MASK_RESET_STATUS);
+ if (ret)
+ return ret;
+
return ad3552r_update_reg_field(dac,
AD3552R_REG_ADDR_INTERFACE_CONFIG_A,
AD3552R_MASK_ADDR_ASCENSION,
--
2.48.1
