Re: [PATCH v2] mtd: rawnand: qcom: fix broken config in qcom_param_page_type_exec

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Feb 09, 2025 at 03:09:38PM +0100, Christian Marangi wrote:
> Fix broken config in qcom_param_page_type_exec caused by copy-paste error
> from commit 0c08080fd71c ("mtd: rawnand: qcom: use FIELD_PREP and GENMASK")
> 
> In qcom_param_page_type_exec the value needs to be set to
> nandc->regs->cfg0 instead of host->cfg0. This wrong configuration caused
> the Qcom NANDC driver to malfunction on any device that makes use of it
> (IPQ806x, IPQ40xx, IPQ807x, IPQ60xx) with the following error:
> 

I'm wondering whether the offending commit was really tested or not :(

> [    0.885369] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xaa
> [    0.885909] nand: Micron NAND 256MiB 1,8V 8-bit
> [    0.892499] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
> [    0.896823] nand: ECC (step, strength) = (512, 8) does not fit in OOB
> [    0.896836] qcom-nandc 79b0000.nand-controller: No valid ECC settings possible
> [    0.910996] bam-dma-engine 7984000.dma-controller: Cannot free busy channel
> [    0.918070] qcom-nandc: probe of 79b0000.nand-controller failed with error -28
> 
> Restore original configuration fix the problem and makes the driver work
> again.
> 
> Also restore the wrongly dropped cpu_to_le32 to correctly support BE
> systems.
> 
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: 0c08080fd71c ("mtd: rawnand: qcom: use FIELD_PREP and GENMASK")
> Tested-by: Robert Marko <robimarko@xxxxxxxxx> # IPQ8074 and IPQ6018
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

Thanks for the fix!

- Mani

> ---
> Changes v2:
> - Fix smatch warning (add missing cpu_to_le32 that was also dropped
>   from the FIELD_PREP patch)
> 
>  drivers/mtd/nand/raw/qcom_nandc.c | 24 ++++++++++++------------
>  1 file changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index d2d2aeee42a7..6720b547892b 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -1881,18 +1881,18 @@ static int qcom_param_page_type_exec(struct nand_chip *chip,  const struct nand_
>  	nandc->regs->addr0 = 0;
>  	nandc->regs->addr1 = 0;
>  
> -	host->cfg0 = FIELD_PREP(CW_PER_PAGE_MASK, 0) |
> -		     FIELD_PREP(UD_SIZE_BYTES_MASK, 512) |
> -		     FIELD_PREP(NUM_ADDR_CYCLES_MASK, 5) |
> -		     FIELD_PREP(SPARE_SIZE_BYTES_MASK, 0);
> -
> -	host->cfg1 = FIELD_PREP(NAND_RECOVERY_CYCLES_MASK, 7) |
> -		     FIELD_PREP(BAD_BLOCK_BYTE_NUM_MASK, 17) |
> -		     FIELD_PREP(CS_ACTIVE_BSY, 0) |
> -		     FIELD_PREP(BAD_BLOCK_IN_SPARE_AREA, 1) |
> -		     FIELD_PREP(WR_RD_BSY_GAP_MASK, 2) |
> -		     FIELD_PREP(WIDE_FLASH, 0) |
> -		     FIELD_PREP(DEV0_CFG1_ECC_DISABLE, 1);
> +	nandc->regs->cfg0 = cpu_to_le32(FIELD_PREP(CW_PER_PAGE_MASK, 0) |
> +					FIELD_PREP(UD_SIZE_BYTES_MASK, 512) |
> +					FIELD_PREP(NUM_ADDR_CYCLES_MASK, 5) |
> +					FIELD_PREP(SPARE_SIZE_BYTES_MASK, 0));
> +
> +	nandc->regs->cfg1 = cpu_to_le32(FIELD_PREP(NAND_RECOVERY_CYCLES_MASK, 7) |
> +					FIELD_PREP(BAD_BLOCK_BYTE_NUM_MASK, 17) |
> +					FIELD_PREP(CS_ACTIVE_BSY, 0) |
> +					FIELD_PREP(BAD_BLOCK_IN_SPARE_AREA, 1) |
> +					FIELD_PREP(WR_RD_BSY_GAP_MASK, 2) |
> +					FIELD_PREP(WIDE_FLASH, 0) |
> +					FIELD_PREP(DEV0_CFG1_ECC_DISABLE, 1));
>  
>  	if (!nandc->props->qpic_version2)
>  		nandc->regs->ecc_buf_cfg = cpu_to_le32(ECC_CFG_ECC_DISABLE);
> -- 
> 2.47.1
> 

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux