6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
[ Upstream commit 044f2fbaa2725696ecbf1f02ba7ab0a8ccb7e1ae ]
Tx/Rx FIFO size is specified by the parameter "{tx,rx}-fifo-depth" from
stmmac_platform layer.
However, these values are constrained by upper limits determined by the
capabilities of each hardware feature. There is a risk that the upper
bits will be truncated due to the calculation, so it's appropriate to
limit them to the upper limit values and display a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: e7877f52fd4a ("stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
Reviewed-by: Yanteng Si <si.yanteng@xxxxxxxxx>
Signed-off-by: Paolo Abeni <pabeni@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 48ad12bca9566..d3d5c01f6dcba 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7118,6 +7118,21 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
priv->plat->tx_queues_to_use = priv->dma_cap.number_tx_queues;
}
+ if (priv->dma_cap.rx_fifo_size &&
+ priv->plat->rx_fifo_size > priv->dma_cap.rx_fifo_size) {
+ dev_warn(priv->device,
+ "Rx FIFO size (%u) exceeds dma capability\n",
+ priv->plat->rx_fifo_size);
+ priv->plat->rx_fifo_size = priv->dma_cap.rx_fifo_size;
+ }
+ if (priv->dma_cap.tx_fifo_size &&
+ priv->plat->tx_fifo_size > priv->dma_cap.tx_fifo_size) {
+ dev_warn(priv->device,
+ "Tx FIFO size (%u) exceeds dma capability\n",
+ priv->plat->tx_fifo_size);
+ priv->plat->tx_fifo_size = priv->dma_cap.tx_fifo_size;
+ }
+
priv->hw->vlan_fail_q_en =
(priv->plat->flags & STMMAC_FLAG_VLAN_FAIL_Q_EN);
priv->hw->vlan_fail_q = priv->plat->vlan_fail_q;
--
2.39.5
