From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
According to the Rev.1.20 hardware manual for the RZ/Five SoC, the clock
source for HP is derived from PLL6 divided by 2. This patch corrects the
implementation by configuring HP as a fixed clock source instead of a MUX.
The `CPG_PL6_ETH_SSEL` register, which is available on the RZ/G2UL SoC, is
not present on the RZ/Five SoC, necessitating this change.
Fixes: 95d48d270305ad2c ("clk: renesas: r9a07g043: Add support for RZ/Five SoC")
Cc: stable@xxxxxxxxxxxxxxx
Reported-by: Hien Huynh <hien.huynh.px@xxxxxxxxxxx>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
drivers/clk/renesas/r9a07g043-cpg.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/clk/renesas/r9a07g043-cpg.c b/drivers/clk/renesas/r9a07g043-cpg.c
index b97e9a7b9708..da5aa015790c 100644
--- a/drivers/clk/renesas/r9a07g043-cpg.c
+++ b/drivers/clk/renesas/r9a07g043-cpg.c
@@ -138,7 +138,11 @@ static const struct cpg_core_clk r9a07g043_core_clks[] __initconst = {
DEF_DIV("P2", R9A07G043_CLK_P2, CLK_PLL3_DIV2_4_2, DIVPL3A, dtable_1_32),
DEF_FIXED("M0", R9A07G043_CLK_M0, CLK_PLL3_DIV2_4, 1, 1),
DEF_FIXED("ZT", R9A07G043_CLK_ZT, CLK_PLL3_DIV2_4_2, 1, 1),
+#ifdef CONFIG_ARM64
DEF_MUX("HP", R9A07G043_CLK_HP, SEL_PLL6_2, sel_pll6_2),
+#else
+ DEF_FIXED("HP", R9A07G043_CLK_HP, CLK_PLL6_250, 1, 1),
+#endif
DEF_FIXED("SPI0", R9A07G043_CLK_SPI0, CLK_DIV_PLL3_C, 1, 2),
DEF_FIXED("SPI1", R9A07G043_CLK_SPI1, CLK_DIV_PLL3_C, 1, 4),
DEF_SD_MUX("SD0", R9A07G043_CLK_SD0, SEL_SDHI0, SEL_SDHI0_STS, sel_sdhi,
--
2.43.0
