6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fabio Estevam <festevam@xxxxxxxxx>
commit 2a8e34096ec70d73ebb6d9920688ea312700cbd9 upstream.
Using gpiod_set_value() to control the reset GPIO causes some verbose
warnings during boot when the reset GPIO is controlled by an I2C IO
expander.
As the caller can sleep, use the gpiod_set_value_cansleep() variant to
fix the issue.
Tested on a custom i.MX93 board with a ADS124S08 ADC.
Cc: stable@xxxxxxxxxx
Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code")
Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx>
Link: https://patch.msgid.link/20241122164308.390340-1-festevam@xxxxxxxxx
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/iio/adc/ti-ads124s08.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/iio/adc/ti-ads124s08.c
+++ b/drivers/iio/adc/ti-ads124s08.c
@@ -183,9 +183,9 @@ static int ads124s_reset(struct iio_dev
struct ads124s_private *priv = iio_priv(indio_dev);
if (priv->reset_gpio) {
- gpiod_set_value(priv->reset_gpio, 0);
+ gpiod_set_value_cansleep(priv->reset_gpio, 0);
udelay(200);
- gpiod_set_value(priv->reset_gpio, 1);
+ gpiod_set_value_cansleep(priv->reset_gpio, 1);
} else {
return ads124s_write_cmd(indio_dev, ADS124S08_CMD_RESET);
}
