6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx>
commit d08555758fb1dbfb48f0cb58176fdc98009e6070 upstream.
This reverts commit 417d8c47271d5cf1a705e997065873b2a9a36fd4.
With that patch the panel in the Tentacruel ASUS Chromebook CM14
(CM1402F) flickers. There are 1 or 2 times per second a black panel.
Stable Kernel 6.11.5 and mainline 6.12-rc4 works only when reverse
that patch.
Fixes: 417d8c47271d ("drm/mediatek: dsi: Correct calculation formula of PHY Timing")
Cc: stable@xxxxxxxxxxxxxxx
Cc: Shuijing Li <shuijing.li@xxxxxxxxxxxx>
Reported-by: Jens Ziller <zillerbaer@xxxxxx>
Closes: https://patchwork.kernel.org/project/dri-devel/patch/20240412031208.30688-1-shuijing.li@xxxxxxxxxxxx/
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241212001908.6056-1-chunkuang.hu@xxxxxxxxxx/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -248,23 +248,22 @@ static void mtk_dsi_phy_timconfig(struct
u32 data_rate_mhz = DIV_ROUND_UP(dsi->data_rate, HZ_PER_MHZ);
struct mtk_phy_timing *timing = &dsi->phy_timing;
- timing->lpx = (80 * data_rate_mhz / (8 * 1000)) + 1;
- timing->da_hs_prepare = (59 * data_rate_mhz + 4 * 1000) / 8000 + 1;
- timing->da_hs_zero = (163 * data_rate_mhz + 11 * 1000) / 8000 + 1 -
+ timing->lpx = (60 * data_rate_mhz / (8 * 1000)) + 1;
+ timing->da_hs_prepare = (80 * data_rate_mhz + 4 * 1000) / 8000;
+ timing->da_hs_zero = (170 * data_rate_mhz + 10 * 1000) / 8000 + 1 -
timing->da_hs_prepare;
- timing->da_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000 + 1;
+ timing->da_hs_trail = timing->da_hs_prepare + 1;
- timing->ta_go = 4 * timing->lpx;
- timing->ta_sure = 3 * timing->lpx / 2;
- timing->ta_get = 5 * timing->lpx;
- timing->da_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
+ timing->ta_go = 4 * timing->lpx - 2;
+ timing->ta_sure = timing->lpx + 2;
+ timing->ta_get = 4 * timing->lpx;
+ timing->da_hs_exit = 2 * timing->lpx + 1;
- timing->clk_hs_prepare = (57 * data_rate_mhz / (8 * 1000)) + 1;
- timing->clk_hs_post = (65 * data_rate_mhz + 53 * 1000) / 8000 + 1;
- timing->clk_hs_trail = (78 * data_rate_mhz + 7 * 1000) / 8000 + 1;
- timing->clk_hs_zero = (330 * data_rate_mhz / (8 * 1000)) + 1 -
- timing->clk_hs_prepare;
- timing->clk_hs_exit = (118 * data_rate_mhz / (8 * 1000)) + 1;
+ timing->clk_hs_prepare = 70 * data_rate_mhz / (8 * 1000);
+ timing->clk_hs_post = timing->clk_hs_prepare + 8;
+ timing->clk_hs_trail = timing->clk_hs_prepare;
+ timing->clk_hs_zero = timing->clk_hs_trail * 4;
+ timing->clk_hs_exit = 2 * timing->clk_hs_trail;
timcon0 = FIELD_PREP(LPX, timing->lpx) |
FIELD_PREP(HS_PREP, timing->da_hs_prepare) |
