On 10/01/2025 16:29, Abel Vesa wrote:
> The pmic_glink_altmode_worker() currently gets scheduled on the system_wq.
> When the system is suspended (s2idle), the fact that the worker can be
> scheduled to run while devices are still suspended provesto be a problem
> when a Type-C retimer, switch or mux that is controlled over a bus like
> I2C, because the I2C controller is suspended.
>
> This has been proven to be the case on the X Elite boards where such
> retimers (ParadeTech PS8830) are used in order to handle Type-C
> orientation and altmode configuration. The following warning is thrown:
>
> [ 35.134876] i2c i2c-4: Transfer while suspended
> [ 35.143865] WARNING: CPU: 0 PID: 99 at drivers/i2c/i2c-core.h:56 __i2c_transfer+0xb4/0x57c [i2c_core]
> [ 35.352879] Workqueue: events pmic_glink_altmode_worker [pmic_glink_altmode]
> [ 35.360179] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
> [ 35.455242] Call trace:
> [ 35.457826] __i2c_transfer+0xb4/0x57c [i2c_core] (P)
> [ 35.463086] i2c_transfer+0x98/0xf0 [i2c_core]
> [ 35.467713] i2c_transfer_buffer_flags+0x54/0x88 [i2c_core]
> [ 35.473502] regmap_i2c_write+0x20/0x48 [regmap_i2c]
> [ 35.478659] _regmap_raw_write_impl+0x780/0x944
> [ 35.483401] _regmap_bus_raw_write+0x60/0x7c
> [ 35.487848] _regmap_write+0x134/0x184
> [ 35.491773] regmap_write+0x54/0x78
> [ 35.495418] ps883x_set+0x58/0xec [ps883x]
> [ 35.499688] ps883x_sw_set+0x60/0x84 [ps883x]
> [ 35.504223] typec_switch_set+0x48/0x74 [typec]
> [ 35.508952] pmic_glink_altmode_worker+0x44/0x1fc [pmic_glink_altmode]
> [ 35.515712] process_scheduled_works+0x1a0/0x2d0
> [ 35.520525] worker_thread+0x2a8/0x3c8
> [ 35.524449] kthread+0xfc/0x184
> [ 35.527749] ret_from_fork+0x10/0x20
>
> The solution here is to schedule the altmode worker on the system_freezable_wq
> instead of the system_wq. This will result in the altmode worker not being
> scheduled to run until the devices are resumed first, which will give the
> controllers like I2C a chance to resume before the transfer is requested.
>
> Fixes: 080b4e24852b ("soc: qcom: pmic_glink: Introduce altmode support")
> Cc: stable@xxxxxxxxxxxxxxx # 6.3
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
This is an incomplete fix, I think. You fix one case but several other
possibilities are still there:
1. Maybe the driver just lacks proper suspend/resume handling?
I assume all this happens during system suspend, so what certainty you
have that your second work - pmic_glink_altmode_pdr_notify() - is not
executed as well?
2. Follow up: all other drivers and all other future use cases will be
affected as well. Basically what this patch is admitting is that driver
can be executed anytime, even during suspend, so each call of
pmic_glink_send() has to be audited. Now and in the future, because what
stops some developer of adding one more path calling pmic_glink_send(),
which also turns out to be executed during suspend?
3. So qcom_battmgr.c is buggy as well?
4. ucsi_glink.c? I don't see handling suspend, either...
Maybe the entire problem is how pmic glink was designed: not as proper
bus driver which handles both child-parent relationship and system suspend.
Best regards,
Krzysztof
