This is a note to let you know that I've just added the patch titled ARM: brcmstb: update CPU power management sequence to the 3.19-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-brcmstb-update-cpu-power-management-sequence.patch and it can be found in the queue-3.19 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From a1ad3b94a7661b643fef2efbc6fc217bd148f462 Mon Sep 17 00:00:00 2001 From: Brian Norris <computersforpeace@xxxxxxxxx> Date: Tue, 16 Dec 2014 19:13:50 -0800 Subject: ARM: brcmstb: update CPU power management sequence From: Brian Norris <computersforpeace@xxxxxxxxx> commit a1ad3b94a7661b643fef2efbc6fc217bd148f462 upstream. The automatic CPU power state machine for B15 CPUs does not work reliably as-is. This patch implements a manual sequence in software to replace it. This was tested successfully with over 10,000 hotplug cycles of something like this: echo 0 > /sys/devices/system/cpu/cpu1/online echo 1 > /sys/devices/system/cpu/cpu1/online whereas the existing sequence often locks up after a few hundred cycles. Fixes: 62639c2f5332 ("ARM: brcmstb: reintroduce SMP support") Acked-by: Gregory Fong <gregory.0xf0@xxxxxxxxx> Signed-off-by: Brian Norris <computersforpeace@xxxxxxxxx> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arm/mach-bcm/platsmp-brcmstb.c | 87 ++++++++++++++++++++++++++---------- 1 file changed, 64 insertions(+), 23 deletions(-) --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c @@ -17,6 +17,7 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/jiffies.h> #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/printk.h> @@ -94,10 +95,35 @@ static u32 pwr_ctrl_rd(u32 cpu) return readl_relaxed(base); } -static void pwr_ctrl_wr(u32 cpu, u32 val) +static void pwr_ctrl_set(unsigned int cpu, u32 val, u32 mask) { void __iomem *base = pwr_ctrl_get_base(cpu); - writel(val, base); + writel((readl(base) & mask) | val, base); +} + +static void pwr_ctrl_clr(unsigned int cpu, u32 val, u32 mask) +{ + void __iomem *base = pwr_ctrl_get_base(cpu); + writel((readl(base) & mask) & ~val, base); +} + +#define POLL_TMOUT_MS 500 +static int pwr_ctrl_wait_tmout(unsigned int cpu, u32 set, u32 mask) +{ + const unsigned long timeo = jiffies + msecs_to_jiffies(POLL_TMOUT_MS); + u32 tmp; + + do { + tmp = pwr_ctrl_rd(cpu) & mask; + if (!set == !tmp) + return 0; + } while (time_before(jiffies, timeo)); + + tmp = pwr_ctrl_rd(cpu) & mask; + if (!set == !tmp) + return 0; + + return -ETIMEDOUT; } static void cpu_rst_cfg_set(u32 cpu, int set) @@ -139,15 +165,22 @@ static void brcmstb_cpu_power_on(u32 cpu * The secondary cores power was cut, so we must go through * power-on initialization. */ - u32 tmp; + pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, 0xffffff00); + pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1); + pwr_ctrl_set(cpu, ZONE_RESERVED_1_MASK, -1); - /* Request zone power up */ - pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK); + pwr_ctrl_set(cpu, ZONE_MAN_MEM_PWR_MASK, -1); - /* Wait for the power up FSM to complete */ - do { - tmp = pwr_ctrl_rd(cpu); - } while (!(tmp & ZONE_PWR_ON_STATE_MASK)); + if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_MEM_PWR_STATE_MASK)) + panic("ZONE_MEM_PWR_STATE_MASK set timeout"); + + pwr_ctrl_set(cpu, ZONE_MAN_CLKEN_MASK, -1); + + if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_DPG_PWR_STATE_MASK)) + panic("ZONE_DPG_PWR_STATE_MASK set timeout"); + + pwr_ctrl_clr(cpu, ZONE_MAN_ISO_CNTL_MASK, -1); + pwr_ctrl_set(cpu, ZONE_MAN_RESET_CNTL_MASK, -1); } static int brcmstb_cpu_get_power_state(u32 cpu) @@ -174,25 +207,33 @@ static void brcmstb_cpu_die(u32 cpu) static int brcmstb_cpu_kill(u32 cpu) { - u32 tmp; + /* + * Ordinarily, the hardware forbids power-down of CPU0 (which is good + * because it is the boot CPU), but this is not true when using BPCM + * manual mode. Consequently, we must avoid turning off CPU0 here to + * ensure that TI2C master reset will work. + */ + if (cpu == 0) { + pr_warn("SMP: refusing to power off CPU0\n"); + return 1; + } while (per_cpu_sw_state_rd(cpu)) ; - /* Program zone reset */ - pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK | - ZONE_PWR_DN_REQ_MASK); - - /* Verify zone reset */ - tmp = pwr_ctrl_rd(cpu); - if (!(tmp & ZONE_RESET_STATE_MASK)) - pr_err("%s: Zone reset bit for CPU %d not asserted!\n", - __func__, cpu); + pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1); + pwr_ctrl_clr(cpu, ZONE_MAN_RESET_CNTL_MASK, -1); + pwr_ctrl_clr(cpu, ZONE_MAN_CLKEN_MASK, -1); + pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, -1); + pwr_ctrl_clr(cpu, ZONE_MAN_MEM_PWR_MASK, -1); - /* Wait for power down */ - do { - tmp = pwr_ctrl_rd(cpu); - } while (!(tmp & ZONE_PWR_OFF_STATE_MASK)); + if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_MEM_PWR_STATE_MASK)) + panic("ZONE_MEM_PWR_STATE_MASK clear timeout"); + + pwr_ctrl_clr(cpu, ZONE_RESERVED_1_MASK, -1); + + if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_DPG_PWR_STATE_MASK)) + panic("ZONE_DPG_PWR_STATE_MASK clear timeout"); /* Flush pipeline before resetting CPU */ mb(); Patches currently in stable-queue which might be from computersforpeace@xxxxxxxxx are queue-3.19/arm-brcmstb-update-cpu-power-management-sequence.patch -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html