6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> [ Upstream commit f07f9d2467f4a298d24e186ddee6f69724903067 ] MILLI and MICRO may be used in the driver to make code more robust against possible miscalculations. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20231128180654.395692-4-andriy.shevchenko@xxxxxxxxxxxxxxx Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> Stable-dep-of: 74d7e038fd07 ("hwmon: (tmp513) Fix interpretation of values of Shunt Voltage and Limit Registers") Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/hwmon/tmp513.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/hwmon/tmp513.c b/drivers/hwmon/tmp513.c index 67b13ac5512c..1e50ac680378 100644 --- a/drivers/hwmon/tmp513.c +++ b/drivers/hwmon/tmp513.c @@ -32,6 +32,7 @@ #include <linux/regmap.h> #include <linux/slab.h> #include <linux/types.h> +#include <linux/units.h> // Common register definition #define TMP51X_SHUNT_CONFIG 0x00 @@ -104,8 +105,8 @@ #define TMP51X_REMOTE_TEMP_LIMIT_2_POS 8 #define TMP513_REMOTE_TEMP_LIMIT_3_POS 7 -#define TMP51X_VBUS_RANGE_32V 32000000 -#define TMP51X_VBUS_RANGE_16V 16000000 +#define TMP51X_VBUS_RANGE_32V (32 * MICRO) +#define TMP51X_VBUS_RANGE_16V (16 * MICRO) // Max and Min value #define MAX_BUS_VOLTAGE_32_LIMIT 32764 @@ -200,7 +201,7 @@ static int tmp51x_get_value(struct tmp51x_data *data, u8 reg, u8 pos, * on the pga gain setting. 1lsb = 10uV */ *val = sign_extend32(regval, 17 - tmp51x_get_pga_shift(data)); - *val = DIV_ROUND_CLOSEST(*val * 10000, data->shunt_uohms); + *val = DIV_ROUND_CLOSEST(*val * 10 * MILLI, data->shunt_uohms); break; case TMP51X_BUS_VOLTAGE_RESULT: case TMP51X_BUS_VOLTAGE_H_LIMIT: @@ -216,7 +217,7 @@ static int tmp51x_get_value(struct tmp51x_data *data, u8 reg, u8 pos, case TMP51X_BUS_CURRENT_RESULT: // Current = (ShuntVoltage * CalibrationRegister) / 4096 *val = sign_extend32(regval, 16) * data->curr_lsb_ua; - *val = DIV_ROUND_CLOSEST(*val, 1000); + *val = DIV_ROUND_CLOSEST(*val, MILLI); break; case TMP51X_LOCAL_TEMP_RESULT: case TMP51X_REMOTE_TEMP_RESULT_1: @@ -256,7 +257,7 @@ static int tmp51x_set_value(struct tmp51x_data *data, u8 reg, long val) * The user enter current value and we convert it to * voltage. 1lsb = 10uV */ - val = DIV_ROUND_CLOSEST(val * data->shunt_uohms, 10000); + val = DIV_ROUND_CLOSEST(val * data->shunt_uohms, 10 * MILLI); max_val = U16_MAX >> tmp51x_get_pga_shift(data); regval = clamp_val(val, -max_val, max_val); break; @@ -546,18 +547,16 @@ static int tmp51x_calibrate(struct tmp51x_data *data) if (data->shunt_uohms == 0) return regmap_write(data->regmap, TMP51X_SHUNT_CALIBRATION, 0); - max_curr_ma = DIV_ROUND_CLOSEST_ULL(vshunt_max * 1000 * 1000, - data->shunt_uohms); + max_curr_ma = DIV_ROUND_CLOSEST_ULL(vshunt_max * MICRO, data->shunt_uohms); /* * Calculate the minimal bit resolution for the current and the power. * Those values will be used during register interpretation. */ - data->curr_lsb_ua = DIV_ROUND_CLOSEST_ULL(max_curr_ma * 1000, 32767); + data->curr_lsb_ua = DIV_ROUND_CLOSEST_ULL(max_curr_ma * MILLI, 32767); data->pwr_lsb_uw = 20 * data->curr_lsb_ua; - div = DIV_ROUND_CLOSEST_ULL(data->curr_lsb_ua * data->shunt_uohms, - 1000 * 1000); + div = DIV_ROUND_CLOSEST_ULL(data->curr_lsb_ua * data->shunt_uohms, MICRO); return regmap_write(data->regmap, TMP51X_SHUNT_CALIBRATION, DIV_ROUND_CLOSEST(40960, div)); @@ -683,7 +682,7 @@ static int tmp51x_read_properties(struct device *dev, struct tmp51x_data *data) memcpy(data->nfactor, nfactor, (data->id == tmp513) ? 3 : 2); // Check if shunt value is compatible with pga-gain - if (data->shunt_uohms > data->pga_gain * 40 * 1000 * 1000) { + if (data->shunt_uohms > data->pga_gain * 40 * MICRO) { return dev_err_probe(dev, -EINVAL, "shunt-resistor: %u too big for pga_gain: %u\n", data->shunt_uohms, data->pga_gain); -- 2.39.5
