With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This can happen during scenarios such as system suspend and breaks the resume of PCIe controllers from suspend. So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs during gdsc_disable() and allow the hardware to transition the GDSCs to retention when the parent domain enters low power state during system suspend. Cc: stable@xxxxxxxxxxxxxxx # 6.2 Fixes: 955f2ea3b9e9 ("clk: qcom: Add GCC driver for SM8550") Reported-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> --- drivers/clk/qcom/gcc-sm8550.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/clk/qcom/gcc-sm8550.c b/drivers/clk/qcom/gcc-sm8550.c index 5abaeddd6afc..862a9bf73bcb 100644 --- a/drivers/clk/qcom/gcc-sm8550.c +++ b/drivers/clk/qcom/gcc-sm8550.c @@ -3003,7 +3003,7 @@ static struct gdsc pcie_0_gdsc = { .pd = { .name = "pcie_0_gdsc", }, - .pwrsts = PWRSTS_OFF_ON, + .pwrsts = PWRSTS_RET_ON, .flags = VOTABLE | POLL_CFG_GDSCR | RETAIN_FF_ENABLE, }; @@ -3014,7 +3014,7 @@ static struct gdsc pcie_0_phy_gdsc = { .pd = { .name = "pcie_0_phy_gdsc", }, - .pwrsts = PWRSTS_OFF_ON, + .pwrsts = PWRSTS_RET_ON, .flags = VOTABLE | POLL_CFG_GDSCR | RETAIN_FF_ENABLE, }; @@ -3025,7 +3025,7 @@ static struct gdsc pcie_1_gdsc = { .pd = { .name = "pcie_1_gdsc", }, - .pwrsts = PWRSTS_OFF_ON, + .pwrsts = PWRSTS_RET_ON, .flags = VOTABLE | POLL_CFG_GDSCR | RETAIN_FF_ENABLE, }; @@ -3036,7 +3036,7 @@ static struct gdsc pcie_1_phy_gdsc = { .pd = { .name = "pcie_1_phy_gdsc", }, - .pwrsts = PWRSTS_OFF_ON, + .pwrsts = PWRSTS_RET_ON, .flags = VOTABLE | POLL_CFG_GDSCR | RETAIN_FF_ENABLE, }; -- 2.25.1