This is a note to let you know that I've just added the patch titled Bluetooth: btusb: Add support for Dynex/Insignia USB dongles to the 3.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: bluetooth-btusb-add-support-for-dynex-insignia-usb-dongles.patch and it can be found in the queue-3.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From d049f4e513e861167361b06c7ca85f9e872c8cde Mon Sep 17 00:00:00 2001 From: Marcel Holtmann <marcel@xxxxxxxxxxxx> Date: Mon, 26 Jan 2015 20:35:32 -0800 Subject: Bluetooth: btusb: Add support for Dynex/Insignia USB dongles From: Marcel Holtmann <marcel@xxxxxxxxxxxx> commit d049f4e513e861167361b06c7ca85f9e872c8cde upstream. The Dynex/Insignia USB dongles are Broadcom BCM20702B0 based and require firmware update before operation. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=19ff ProdID=0239 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Since this is an unsual USB vendor ID (0x19ff), these dongles are added via USB_DEVICE macro and not USB_VENDOR_AND_INTERFACE_INFO as done for mainstream Broadcom based dongles. The latest known working firmware is BCM20702B0_002.001.014.0527.0557.hex which needs to be converted using hex2hcd utility and then installed as /lib/firmware/brcm/BCM20702A0-19ff-0239.hcd to make this device fully operational. Bluetooth: hci0: BCM: patching hci_ver=06 hci_rev=2000 lmp_ver=06 lmp_subver=410e Bluetooth: hci0: BCM: firmware hci_ver=06 hci_rev=222d lmp_ver=06 lmp_subver=410e With this firmware the device reports support for connectionless slave broadcast (master and slave) feature used by 3D Glasses and TVs. < HCI Command: Read Local Extended Features (0x04|0x0004) plen 1 Page: 2 > HCI Event: Command Complete (0x0e) plen 14 Read Local Extended Features (0x04|0x0004) ncmd 1 Status: Success (0x00) Page: 2/2 Features: 0x0f 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Connectionless Slave Broadcast - Master Connectionless Slave Broadcast - Slave Synchronization Train Synchronization Scan However there are some flaws with this feature. The Set Event Mask Page 2 command is actually not supported and with that all connectionless slave broadcast events are always enabled. < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x00000000000f0000 Synchronization Train Received Connectionless Slave Broadcast Receive Connectionless Slave Broadcast Timeout Truncated Page Complete > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) In addition the Synchronization Train Received event is actually broken on this controller. It mixes up the order of parameters. According to the Bluetooth Core specification the fields are like this: struct hci_ev_sync_train_received { __u8 status; bdaddr_t bdaddr; __le32 offset; __u8 map[10]; __u8 lt_addr; __le32 instant; __le16 interval; __u8 service_data; } __packed; This controller however sends the service_data as 5th parameter instead of having it as last parameter. struct hci_ev_sync_train_received { __u8 status; bdaddr_t bdaddr; __le32 offset; __u8 map[10]; __u8 service_data; __u8 lt_addr; __le32 instant; __le16 interval; } __packed; So anybody trying to use this hardware for utilizing connectionless slave broadcast receivers (aka 3D Glasses), be warned about this shortcoming. Signed-off-by: Marcel Holtmann <marcel@xxxxxxxxxxxx> Signed-off-by: Johan Hedberg <johan.hedberg@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -107,6 +107,9 @@ static const struct usb_device_id btusb_ { USB_DEVICE(0x0489, 0xe042) }, { USB_DEVICE(0x413c, 0x8197) }, + /* Broadcom BCM20702B0 (Dynex/Insignia) */ + { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM }, + /* Foxconn - Hon Hai */ { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01) }, Patches currently in stable-queue which might be from marcel@xxxxxxxxxxxx are queue-3.14/bluetooth-btusb-add-support-for-dynex-insignia-usb-dongles.patch queue-3.14/bluetooth-ath3k-workaround-the-compatibility-issue-with-xhci-controller.patch -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html