5.15-stable review patch. If anyone has any objections, please let me know. ------------------ From: Tristram Ha <Tristram.Ha@xxxxxxxxxxxxx> commit 4bdf79d686b49ac49373b36466acfb93972c7d7c upstream. The KSZ8795 driver code was modified to use on KSZ8863/73, which has different register definitions. Some of the new KSZ8795 register information are wrong compared to previous code. KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading than writing. To compensate that a special code was added to shift the register value by 1 before applying those bits. This is wrong when the code is running on KSZ8863, so this special code is only executed when KSZ8795 is detected. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Tristram Ha <Tristram.Ha@xxxxxxxxxxxxx> Reviewed-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx> Reviewed-by: Simon Horman <simon.horman@xxxxxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Jörg Sommer <joerg@xxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/dsa/microchip/ksz8795.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -25,6 +25,8 @@ #include "ksz8795_reg.h" #include "ksz8.h" +#define KSZ8795_CHIP_ID 0x09 + static const u8 ksz8795_regs[] = { [REG_IND_CTRL_0] = 0x6E, [REG_IND_DATA_8] = 0x70, @@ -52,13 +54,13 @@ static const u32 ksz8795_masks[] = { [STATIC_MAC_TABLE_VALID] = BIT(21), [STATIC_MAC_TABLE_USE_FID] = BIT(23), [STATIC_MAC_TABLE_FID] = GENMASK(30, 24), - [STATIC_MAC_TABLE_OVERRIDE] = BIT(26), - [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(24, 20), + [STATIC_MAC_TABLE_OVERRIDE] = BIT(22), + [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(20, 16), [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(6, 0), - [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(8), + [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(7), [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7), [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 29), - [DYNAMIC_MAC_TABLE_FID] = GENMASK(26, 20), + [DYNAMIC_MAC_TABLE_FID] = GENMASK(22, 16), [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24), [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(28, 27), }; @@ -601,7 +603,13 @@ static int ksz8_r_sta_mac_table(struct k shifts[STATIC_MAC_FWD_PORTS]; alu->is_override = (data_hi & masks[STATIC_MAC_TABLE_OVERRIDE]) ? 1 : 0; - data_hi >>= 1; + + /* KSZ8795 family switches have STATIC_MAC_TABLE_USE_FID and + * STATIC_MAC_TABLE_FID definitions off by 1 when doing read on the + * static MAC table compared to doing write. + */ + if (dev->chip_id == KSZ8795_CHIP_ID) + data_hi >>= 1; alu->is_static = true; alu->is_use_fid = (data_hi & masks[STATIC_MAC_TABLE_USE_FID]) ? 1 : 0;