[PATCH v2 03/14] usb: host: ehci: use new USB_RESUME_TIMEOUT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Make sure we're using the new macro, so our
resume signaling will always pass certification.

Cc: <stable@xxxxxxxxxxxxxxx> # v3.10+
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
 drivers/usb/host/ehci-hcd.c | 10 +++++-----
 drivers/usb/host/ehci-hub.c |  9 ++++++---
 2 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 85e56d1abd23..f4d88dfb26a7 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -792,12 +792,12 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 					ehci->reset_done[i] == 0))
 				continue;
 
-			/* start 20 msec resume signaling from this port,
-			 * and make hub_wq collect PORT_STAT_C_SUSPEND to
-			 * stop that signaling.  Use 5 ms extra for safety,
-			 * like usb_port_resume() does.
+			/* start USB_RESUME_TIMEOUT msec resume signaling from
+			 * this port, and make hub_wq collect
+			 * PORT_STAT_C_SUSPEND to stop that signaling.
 			 */
-			ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
+			ehci->reset_done[i] = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			set_bit(i, &ehci->resuming_ports);
 			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
 			usb_hcd_start_port_resume(&hcd->self, i);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 87cf86f38b36..7354d0129a72 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -471,10 +471,13 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 		ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
 	}
 
-	/* msleep for 20ms only if code is trying to resume port */
+	/*
+	 * msleep for USB_RESUME_TIMEOUT ms only if code is trying to resume
+	 * port
+	 */
 	if (resume_needed) {
 		spin_unlock_irq(&ehci->lock);
-		msleep(20);
+		msleep(USB_RESUME_TIMEOUT);
 		spin_lock_irq(&ehci->lock);
 		if (ehci->shutdown)
 			goto shutdown;
@@ -942,7 +945,7 @@ int ehci_hub_control(
 			temp &= ~PORT_WAKE_BITS;
 			ehci_writel(ehci, temp | PORT_RESUME, status_reg);
 			ehci->reset_done[wIndex] = jiffies
-					+ msecs_to_jiffies(20);
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			set_bit(wIndex, &ehci->resuming_ports);
 			usb_hcd_start_port_resume(&hcd->self, wIndex);
 			break;
-- 
2.3.0

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]