6.6-stable review patch. If anyone has any objections, please let me know. ------------------ From: Gabor Juhos <j4g8y7@xxxxxxxxx> commit 36d202241d234fa4ac50743510d098ad52bd193a upstream. The comment before the config of the GPLL3 PLL says that the PLL should run at 930 MHz. In contrary to this, calculating the frequency from the current configuration values by using 19.2 MHz as input frequency defined in 'qcs404.dtsi', it gives 921.6 MHz: $ xo=19200000; l=48; alpha=0x0; alpha_hi=0x0 $ echo "$xo * ($((l)) + $(((alpha_hi << 32 | alpha) >> 8)) / 2^32)" | bc -l 921600000.00000000000000000000 Set 'alpha_hi' in the configuration to a value used in downstream kernels [1][2] in order to get the correct output rate: $ xo=19200000; l=48; alpha=0x0; alpha_hi=0x70 $ echo "$xo * ($((l)) + $(((alpha_hi << 32 | alpha) >> 8)) / 2^32)" | bc -l 930000000.00000000000000000000 The change is based on static code analysis, compile tested only. [1] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/kernel.lnx.5.4.r56-rel/drivers/clk/qcom/gcc-qcs404.c?ref_type=heads#L335 [2} https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/blob/kernel.lnx.5.15.r49-rel/drivers/clk/qcom/gcc-qcs404.c?ref_type=heads#L127 Cc: stable@xxxxxxxxxxxxxxx Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Signed-off-by: Gabor Juhos <j4g8y7@xxxxxxxxx> Link: https://lore.kernel.org/r/20241022-fix-gcc-qcs404-gpll3-v1-1-c4d30d634d19@xxxxxxxxx Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/clk/qcom/gcc-qcs404.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/clk/qcom/gcc-qcs404.c +++ b/drivers/clk/qcom/gcc-qcs404.c @@ -131,6 +131,7 @@ static struct clk_alpha_pll gpll1_out_ma /* 930MHz configuration */ static const struct alpha_pll_config gpll3_config = { .l = 48, + .alpha_hi = 0x70, .alpha = 0x0, .alpha_en_mask = BIT(24), .post_div_mask = 0xf << 8,
