6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guilherme G. Piccoli <gpiccoli@xxxxxxxxxx>
commit 5c1b544563005a00591a3aa86ecff62ed4d11be3 upstream.
Syzkaller reported a hung task with uevent_show() on stack trace. That
specific issue was addressed by another commit [0], but even with that
fix applied (for example, running v6.12-rc5) we face another type of hung
task that comes from the same reproducer [1]. By investigating that, we
could narrow it to the following path:
(a) Syzkaller emulates a Realtek USB WiFi adapter using raw-gadget and
dummy_hcd infrastructure.
(b) During the probe of rtl8192cu, the driver ends-up performing an efuse
read procedure (which is related to EEPROM load IIUC), and here lies the
issue: the function read_efuse() calls read_efuse_byte() many times, as
loop iterations depending on the efuse size (in our example, 512 in total).
This procedure for reading efuse bytes relies in a loop that performs an
I/O read up to *10k* times in case of failures. We measured the time of
the loop inside read_efuse_byte() alone, and in this reproducer (which
involves the dummy_hcd emulation layer), it takes 15 seconds each. As a
consequence, we have the driver stuck in its probe routine for big time,
exposing a stack trace like below if we attempt to reboot the system, for
example:
task:kworker/0:3 state:D stack:0 pid:662 tgid:662 ppid:2 flags:0x00004000
Workqueue: usb_hub_wq hub_event
Call Trace:
__schedule+0xe22/0xeb6
schedule_timeout+0xe7/0x132
__wait_for_common+0xb5/0x12e
usb_start_wait_urb+0xc5/0x1ef
? usb_alloc_urb+0x95/0xa4
usb_control_msg+0xff/0x184
_usbctrl_vendorreq_sync+0xa0/0x161
_usb_read_sync+0xb3/0xc5
read_efuse_byte+0x13c/0x146
read_efuse+0x351/0x5f0
efuse_read_all_map+0x42/0x52
rtl_efuse_shadow_map_update+0x60/0xef
rtl_get_hwinfo+0x5d/0x1c2
rtl92cu_read_eeprom_info+0x10a/0x8d5
? rtl92c_read_chip_version+0x14f/0x17e
rtl_usb_probe+0x323/0x851
usb_probe_interface+0x278/0x34b
really_probe+0x202/0x4a4
__driver_probe_device+0x166/0x1b2
driver_probe_device+0x2f/0xd8
[...]
We propose hereby to drastically reduce the attempts of doing the I/O
reads in case of failures, restricted to USB devices (given that
they're inherently slower than PCIe ones). By retrying up to 10 times
(instead of 10000), we got reponsiveness in the reproducer, while seems
reasonable to believe that there's no sane USB device implementation in
the field requiring this amount of retries at every I/O read in order
to properly work. Based on that assumption, it'd be good to have it
backported to stable but maybe not since driver implementation (the 10k
number comes from day 0), perhaps up to 6.x series makes sense.
[0] Commit 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race")
[1] A note about that: this syzkaller report presents multiple reproducers
that differs by the type of emulated USB device. For this specific case,
check the entry from 2024/08/08 06:23 in the list of crashes; the C repro
is available at https://syzkaller.appspot.com/text?tag=ReproC&x=1521fc83980000.
Cc: stable@xxxxxxxxxxxxxxx # v6.1+
Reported-by: syzbot+edd9fe0d3a65b14588d5@xxxxxxxxxxxxxxxxxxxxxxxxx
Tested-by: Bitterblue Smith <rtl8821cerfe2@xxxxxxxxx>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@xxxxxxxxxx>
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
Link: https://patch.msgid.link/20241101193412.1390391-1-gpiccoli@xxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtlwifi/efuse.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/realtek/rtlwifi/efuse.c
+++ b/drivers/net/wireless/realtek/rtlwifi/efuse.c
@@ -162,10 +162,19 @@ void efuse_write_1byte(struct ieee80211_
void read_efuse_byte(struct ieee80211_hw *hw, u16 _offset, u8 *pbuf)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u16 max_attempts = 10000;
u32 value32;
u8 readbyte;
u16 retry;
+ /*
+ * In case of USB devices, transfer speeds are limited, hence
+ * efuse I/O reads could be (way) slower. So, decrease (a lot)
+ * the read attempts in case of failures.
+ */
+ if (rtlpriv->rtlhal.interface == INTF_USB)
+ max_attempts = 10;
+
rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 1,
(_offset & 0xff));
readbyte = rtl_read_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 2);
@@ -178,7 +187,7 @@ void read_efuse_byte(struct ieee80211_hw
retry = 0;
value32 = rtl_read_dword(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL]);
- while (!(((value32 >> 24) & 0xff) & 0x80) && (retry < 10000)) {
+ while (!(((value32 >> 24) & 0xff) & 0x80) && (retry < max_attempts)) {
value32 = rtl_read_dword(rtlpriv,
rtlpriv->cfg->maps[EFUSE_CTRL]);
retry++;
