Re: [PATCH] clk: en7523: Fix wrong BUS clock for EN7581

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Christian Marangi (2024-11-16 02:56:53)
> The Documentation for EN7581 had a typo and still referenced the EN7523
> BUS base source frequency. This was in conflict with a different page in
> the Documentration that state that the BUS runs at 300MHz (600MHz source
> with divisor set to 2) and the actual watchdog that tick at half the BUS
> clock (150MHz). This was verified with the watchdog by timing the
> seconds that the system takes to reboot (due too watchdog) and by
> operating on different values of the BUS divisor.
> 
> The correct values for source of BUS clock are 600MHz and 540MHz.
> 
> This was also confirmed by Airoha.
> 
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: 66bc47326ce2 ("clk: en7523: Add EN7581 support")
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---

Applied to clk-next





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux