6.12-stable review patch. If anyone has any objections, please let me know. ------------------ From: Filip Brozovic <fbrozovic@xxxxxxxxx> commit 166105c9030a30ba08574a9998afc7b60bc72dd7 upstream. The F81216E is a LPC/eSPI to 4 UART Super I/O and is mostly compatible with the F81216H, but does not support RS-485 auto-direction delays on any port. Signed-off-by: Filip Brozovic <fbrozovic@xxxxxxxxx> Cc: stable <stable@xxxxxxxxxx> Link: https://lore.kernel.org/r/20241110111703.15494-1-fbrozovic@xxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/tty/serial/8250/8250_fintek.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) --- a/drivers/tty/serial/8250/8250_fintek.c +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -21,6 +21,7 @@ #define CHIP_ID_F81866 0x1010 #define CHIP_ID_F81966 0x0215 #define CHIP_ID_F81216AD 0x1602 +#define CHIP_ID_F81216E 0x1617 #define CHIP_ID_F81216H 0x0501 #define CHIP_ID_F81216 0x0802 #define VENDOR_ID1 0x23 @@ -158,6 +159,7 @@ static int fintek_8250_check_id(struct f case CHIP_ID_F81866: case CHIP_ID_F81966: case CHIP_ID_F81216AD: + case CHIP_ID_F81216E: case CHIP_ID_F81216H: case CHIP_ID_F81216: break; @@ -181,6 +183,7 @@ static int fintek_8250_get_ldn_range(str return 0; case CHIP_ID_F81216AD: + case CHIP_ID_F81216E: case CHIP_ID_F81216H: case CHIP_ID_F81216: *min = F81216_LDN_LOW; @@ -250,6 +253,7 @@ static void fintek_8250_set_irq_mode(str break; case CHIP_ID_F81216AD: + case CHIP_ID_F81216E: case CHIP_ID_F81216H: case CHIP_ID_F81216: sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_SHARE, @@ -263,7 +267,8 @@ static void fintek_8250_set_irq_mode(str static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata) { switch (pdata->pid) { - case CHIP_ID_F81216H: /* 128Bytes FIFO */ + case CHIP_ID_F81216E: /* 128Bytes FIFO */ + case CHIP_ID_F81216H: case CHIP_ID_F81966: case CHIP_ID_F81866: sio_write_mask_reg(pdata, FIFO_CTRL, @@ -297,6 +302,7 @@ static void fintek_8250_set_termios(stru goto exit; switch (pdata->pid) { + case CHIP_ID_F81216E: case CHIP_ID_F81216H: reg = RS485; break; @@ -346,6 +352,7 @@ static void fintek_8250_set_termios_hand struct fintek_8250 *pdata = uart->port.private_data; switch (pdata->pid) { + case CHIP_ID_F81216E: case CHIP_ID_F81216H: case CHIP_ID_F81966: case CHIP_ID_F81866: @@ -438,6 +445,11 @@ static void fintek_8250_set_rs485_handle uart->port.rs485_supported = fintek_8250_rs485_supported; break; + case CHIP_ID_F81216E: /* F81216E does not support RS485 delays */ + uart->port.rs485_config = fintek_8250_rs485_config; + uart->port.rs485_supported = fintek_8250_rs485_supported; + break; + default: /* No RS485 Auto direction functional */ break; }
