Code expects array only with 2 items which should be checked.
But also item checking is not working as it should likely because of
incorrect items description.
Fixes: d50f974c4f7f ("dt-bindings: serial: Convert rs485 bindings to json-schema")
Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Link: https://lore.kernel.org/r/820c639b9e22fe037730ed44d1b044cdb6d28b75.1726480384.git.michal.simek@xxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index 9418fd66a8e9..b93254ad2a28 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -18,16 +18,15 @@ properties:
description: prop-encoded-array <a b>
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
- items:
- - description: Delay between rts signal and beginning of data sent in
- milliseconds. It corresponds to the delay before sending data.
- default: 0
- maximum: 100
- - description: Delay between end of data sent and rts signal in milliseconds.
- It corresponds to the delay after sending data and actual release
- of the line.
- default: 0
- maximum: 100
+ - description: Delay between rts signal and beginning of data sent in
+ milliseconds. It corresponds to the delay before sending data.
+ default: 0
+ maximum: 100
+ - description: Delay between end of data sent and rts signal in milliseconds.
+ It corresponds to the delay after sending data and actual release
+ of the line.
+ default: 0
+ maximum: 100
rs485-rts-active-high:
description: drive RTS high when sending (this is the default).
